Schneider Electric · Harmony XB4 Series

XB4-BVB3

Active
UL LISTED CSA IEC 60947-5-5 (NOT ATEX — THE ATEX VERSION IS XB4BVB3EX)

Schneider XB4BVB3 Green Pilot Light, Universal LED, 24 V AC/DC

Part number: B - V
Schneider Electric Harmony XB4 Series Introduced circa 2008
Schneider Electric XB4-BVB3 — Schneider XB4BVB3 Green Pilot Light, Universal LED, 24 V AC/DC

Schneider Harmony XB4 complete 22 mm metal pilot light: green plain lens, Universal LED, 24 V AC/DC. Light block ZBVB1 + head ZB4BV033.

Common Applications

Green "running / ready / power on" indicator for 24 V control panels: the LED lights steadily when 24 V AC or DC is applied. It is not an ATEX device; for dust areas (ATEX zones 21/22) Schneider sells the XB4BVB3EX.

Research Notes

What it is

A complete 22 mm metal pilot light from Schneider Electric's Harmony XB4 range: a chromium-plated metal bezel and Zamak fixing collar, a green plain (flat) lens, and a body with a built-in LED for 24 V AC or DC. It lights steadily when 24 V is applied; it has no contacts and cannot be pressed. Also sold under the older Telemecanique name (short article code 089192).

Today the unit is the green head ZB4BV033 on the Universal LED body ZBVB1. In older catalogues the body was ZB4BVB3, a green LED module. Since about 2022 Schneider fits one universal LED block for every colour, and the colour comes from the lens. The datasheet therefore warns: "A change in appearance may be noted on the product but does not affect its use in terms of function and safety."

Not an ATEX device. The ATEX version for dust areas is a separate part, XB4BVB3EX (see Related parts).

Key specifications (Schneider datasheet)

  • Supply: 24 V AC/DC, 50/60 Hz; works from 19.2 to 30 V; draws 18 mA
  • Light: integral green LED, steady; life 100,000 h at rated voltage and 25 °C
  • Protection: IP66, IP67, IP69, IP69K; UL Type 4X/13; IK06
  • Mounting: 22 mm hole (22.5 mm recommended, 22.3 mm +0.4/0), panel 1–6 mm thick; at least 40 × 30 mm between centres
  • Wiring: screw-clamp terminals, 1 × 0.22 to 2 × 2.5 mm² without cable end, up to 2 × 1.5 mm² with cable end
  • Insulation: Ui 250 V; Uimp 4 kV (IEC 60947-1)
  • Size and weight: 47 × 30 × 54 mm, 80 g
  • Temperature: −40 to +70 °C (operation and storage)
  • Robustness: vibration 5 gn (12–500 Hz); shock 30 gn
  • Approvals: UL Listed, CSA; IEC 60947-5-5 and IEC 60947-1
  • Codes and warranty: 18 months; EAN 3389110891928; country of origin France

Status and price

Active; "normally stocked in distribution" according to Schneider (October 2026).

Prices seen in October 2026:

  • US: Amazon $31.43; Newark $52.92 for one ($46.32 at 10+); genuine listings on eBay mostly $20–54; new surplus about $28
  • Europe: RS UK £18.53; Automation24 €15.10 (business price); Conrad €22.99; Farnell Italy €24.13, Switzerland CHF 22.69; RS France €21.13; Czech price comparison (Heureka) from 579 Kč; Mouser €45.51; genuine listings on eBay Germany mostly €8–22
  • Asia-Pacific: element14 Singapore S$74.77, Malaysia RM78.22, India Rs 2,681; Australia $148.66 (RS) to $154.61 (element14)
  • Elsewhere: Brazil R$279; Russia about 3,460 ₽ (Promelectrica; 1,000 ₽ new on Avito); Kazakhstan 4,540 ₸; Japan ¥12,980 before tax (Monotaro); Turkey 738 TL (Schneider Turkey list price, 2025; the same price for all five colours)

Related parts

  • Other colours, 24 V: XB4BVB1 (white), XB4BVB4 (red), XB4BVB5 (orange/yellow), XB4BVB6 (blue)
  • Green for other voltages: XB4BVG3 (110–120 V AC), XB4BVM3 (230–240 V AC), XB4BV63 (direct supply up to 250 V; takes a BA9s bulb, not included)
  • Same light, other versions: XB4BVB35 (push-in terminals); XB4BVB3EX (ATEX version for dust areas: Harmony XB4 ATEX D, zones 21 and 22, certificate INERIS 04ATEX9004U, IP65, −20 to +60 °C in ATEX use)
  • Plastic equivalent: XB5AVB3 (Harmony XB5)
  • Spare parts: head ZB4BV033; LED body ZBVB1
  • Russian-market equivalent: KEAZ OptiSignal D22 C4-L-B3 (332175), which KEAZ itself sells as the XB4BVB3 equivalent. KEAZ now marks it as replaced/discontinued.

Where it is used

  • Oil and gas: the bill of materials for the fire and gas system of the Bahregan crude-oil storage tanks (Iran, 2021) lists "LED Signal Lamp Green – 24VDC SCHNEIDER XB4-BVB3" next to the red XB4-BVB4.
  • Mining machinery: a Metso HP cone crusher parts list includes "SIGNAL LAMP XB4-BVB3" with the red and yellow lamps and XB4 pushbutton bodies.
  • Industrial cleaning: Magido sells it as the genuine green indicator light of its HP-25T and HP-30T glove-box parts washers.
  • Welding machines: a French engineering thesis on renovating a Soudronic can-body welder uses two XB4BVB3s (24 V AC) for "machine on" and "wheels turning", with a red XB4BVB4.
  • Generally, it is a "running / ready / power on" indicator on 24 V control panels.

Buying notes

  • Genuine or look-alike? Of the marketplace listings we read that use "XB4BVB3", only about one in six names Schneider. Most are unbranded "LED Signal Button Indicator XB4-BVB3 BVB4 BVB1 BVM5 BVM6 24V 230V" lights from China under changing brand names, at €3 to over $300.
    • Many of these are sold in "220V" or even "380V" versions under the XB4-BVB3 name. The real XB4BVB3 is 24 V only; for 230 V you need the XB4BVM3.
  • The ATEX mix-up. Some shops and catalogues mix up the XB4BVB3 and the ATEX XB4BVB3EX.
    • A Japanese shop shows the ATEX certificate on the plain XB4BVB3.
    • Several Czech shops title the XB4BVB3EX "110–120 V"; it is 24 V.
    • Our own record of this part wrongly said "ATEX … Zone 1/21" until October 2026.
    • Only the EX version is certified, and only for dust zones 21/22, not for gas zones.
  • IP65 or IP66–IP69K? Older catalogues and some distributors (Cebeo, Schneider's own short Spanish text) still say IP65, and one Latin American B2B shop even IK05. The current datasheet gives IP66/IP67/IP69/IP69K; IP65 is the rating of the ATEX version.
  • AI-written pages on large marketplaces describe it wrongly, e.g. as "dual voltage 24 V or 230 V" with a "polymer body". Use the Schneider datasheet.

What users say

No reviews of the genuine part were found. Ratings on Amazon and other marketplaces belong to the unbranded look-alikes.

14 sources
  1. Schneider Electric product page and datasheet: XB4BVB3 (October 2026) — Schneider Electric
  2. XB4BVB3 datasheet (October 2024 copy) with the 'change in appearance … Universal LED' notice — Schneider Electric (Scribd copy)
  3. Nuevo Bloque LED Universal para Harmony XB4 y XB5 (2022) — Schneider Electric Latinoamérica, YouTube
  4. XB4BVB3EX: Harmony XB4 ATEX D version of this pilot light — Schneider Electric
  5. XB4BVB3EX data: dust zone 21–22, INERIS 04ATEX9004U — Cadenza Electric
  6. Monotaro: XB4BVB3 page showing the ATEX certificate of the EX version — MonotaRO
  7. Bahregan crude-oil storage tanks, F&G device bill of material (rev. 03, 2021) — Scribd
  8. Metso HP cone crusher parts list: SIGNAL LAMP XB4-BVB3 — Scribd
  9. Magido HP-25T / HP-30T parts washer: green indicator light XB4BVB3 — SolventRS
  10. Engineering thesis: renovation of a Soudronic welder (indicator lights XB4 BVB3 / BVB4) — Mémoire Online
  11. KEAZ OptiSignal D22 C4-L-B3 (332175), sold as the XB4BVB3 equivalent — KEAZ
  12. RS Components: XB4BVB3 (RS 330-8919), prices by country — RS Components
  13. Farnell / element14: XB4BVB3 (2614647), prices by country — Farnell
  14. Amazon: unbranded 'XB4-BVB3 … 24V 230V' look-alike listings (October 2026) — Amazon
About the Harmony XB4 range

Applies to every part of the range, not only the XB4-BVB3.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Bezel
Chromium plated metal
Certifications
UL Listed, CSA; IEC 60947-5-5 (not ATEX — the ATEX version is XB4BVB3EX)
Color
Green
Composition
ZBVB1 light block + ZB4BV033 head
Country of origin
France
Current consumption
18 mA
Cutout Diameter
22mm (22.5 mm recommended)
Dimensions
47 × 30 × 54 mm
Ean
3389110891928
Environmental Rating
UL Type 4X/13
Ik rating
IK06
Insulation
Ui 250 V, Uimp 4 kV
IP Rating
IP66, IP67, IP69, IP69K
Led life
100,000 h at rated voltage, 25 °C
LED Voltage
24V AC/DC
Lens
Plain, green
Light source
Integral LED (Universal LED body ZBVB1)
Material
Zamak fixing collar
Max Operating Temp
+70°C
Min Operating Temp
-40°C
Pn status
verified-catalogue
Signalling
Steady
Supply voltage limits
19.2–30 V
Terminal Type
Screw clamp
Warranty
18 months
Weight
80 g

Specs with this icon are linked to the manufacturer's original source page

You'll Also Need

This is a modular component. For a complete assembly, you may also need:

Installation Quick Reference

Panel cutout: 22mm (22.5 mm recommended). Insert from the front, secure with mounting nut.

LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.

Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Troubleshooting

Light is dim or flickering

Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).

Light doesn't turn on

Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.

Mounting the Harmony XB4 ZB4 22mm Metal Push Button & Contacts | Schneider Electric Support

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Mounting a 22 mm Harmony XB4/ZB4 metal operator: you need the operator and a flat screwdriver. 0:13
  2. Step 2
    2. Hold the operator with its mounting collar and contact blocks attached, and take a flat screwdriver. 0:19
  3. Step 3
    3. Find the black tab on the collar and insert the screwdriver underneath it. 0:20
  4. Step 4
    4. Lever the tab up to release the head from the collar. 0:26
  5. Step 5
    5. Push the head through the 22 mm hole in the panel or door from the front. 0:31
  6. Step 6
    6. From behind, take the mounting collar. 0:37
  7. Step 7
    7. With its forks facing up, snap the collar onto the back of the head. 0:43
  8. Step 8
    8. The collar now holds in place on its own. 0:46
  9. Step 9
    9. Tighten the fixing screw (Schneider calls it the ground screw). 0:50
  10. Step 10
    10. Press down firmly while you turn the screw. 0:52
  11. Step 11
    11. Keep turning until the operator sits tight on the panel and no longer turns. 1:00

Step text written from the video's narration.

Removing Contacts from Harmony XB4 22mm Metal Push Button | Schneider Electric

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Removing the contact blocks from a 22 mm Harmony XB4 metal operator. 0:12
  2. Step 2
    2. Loosen the fixing screw on the back of the collar. 0:18
  3. Step 3
    3. Once it is loose, find the black tab that holds the collar to the head. 0:22
  4. Step 4
    4. Insert the screwdriver under the tab and pull back to release the head. 0:29
  5. Step 5
    5. The collar with its contact blocks comes away from the head. 0:34

Step text written from the video's narration.

Cómo verificar la luz del pulsador luminoso de metal de la gama Harmony

Schneider Electric · watch on YouTube

Comment vérifier la lumière du voyant en métal Harmony XB4

Schneider Electric · watch on YouTube

XB4BVB3

Elica Electric · watch on YouTube

Nuevo Bloque LED Universal para Harmony XB4 y XB5

Schneider Electric Latinoamérica · watch on YouTube

Schneider Electric XB4-BVB3 LED Pilot Light 24V AC/DC 22mm Green | Telemecanique Indicator Light

Industrial Electrical Warehouse · watch on YouTube

XB4BVB3 Лампа сигнальная Schneider Electric - Олниса

Компания "Олниса" · watch on YouTube

Quick Specs

Bezel
Chromium plated metal
Certifications
UL Listed, CSA; IEC 60947-5-5 (not ATEX — the ATEX version is XB4BVB3EX)
Color
Green
Composition
ZBVB1 light block + ZB4BV033 head
Country of origin
France

What People Are Saying

+

“Schneider Electric indicators are reliable. Match the LED voltage to your PLC output. Follow IEC 60204-1 color coding — your maintenance team will appreciate consistent standards.”

Reddit r/electricians 17 upvotes View thread →

Data Sources

Specifications and product data sourced from the following references.

XB4BVB3 Product Page

https://www.se.com/ww/en/product/XB4BVB3/

Accessed April 04, 2026

Source