Schneider Electric · Harmony XB4 Series

XB4-BVM3

Active
UL CSA CE

XB4BVM3 22mm Green Pilot Light 230V (Integral LED)

Part number: B - V
Schneider Electric Harmony XB4 Series Introduced circa 2003

Schneider Harmony XB4 buzzer — audible indicator in 22mm mounting.

Common Applications

Panel-mount buzzer in standard Harmony XB4 form factor. Continuous or pulsed tone. Mounts in the same 22mm cutout as buttons and indicators. Used for fault alerts, cycle completion, and operator attention.

Research Notes

1. Overview

The Schneider Electric Harmony XB4BVM3 is a complete 22mm green pilot light (indicator lamp) — metal bezel, plain (unmarked) lens, with an integral LED rated for 230–240 V AC. It is an indicator/signaling device, not a pushbutton and not a buzzer — no contact, no switching, no sounder. In the Harmony XB4 "BV" family, BV = voyant (pilot light); the trailing digit encodes color (3 = green). It is a self-contained unit (lens + body + LED), so no separate lamp block is required.

2. User Sentiment

A standard industrial indicator with the usual Harmony build quality (chromium-plated metal bezel, sealed front). Integrators value the integral-LED complete design (one part number, no separate bulb/holder) and clear color coding. The main selection care is voltage class (this is the 230–240 V AC variant; 24 V and universal-LED variants use different suffixes) and confirming "pilot light" vs the illuminated-pushbutton parts that share the XB4 body.

3. Real-World Applications

Panel status indication — "power on", "run", "healthy", process-normal signaling — on control panels, machinery, and distribution boards operating on 230 V AC control voltage. Green conventionally indicates a normal/running/safe condition (IEC 60073).

4. Technical Specifications

  • Type: Complete 22mm pilot light (indicator), plain lens — NOT a pushbutton or buzzer
  • Color: Green (digit 3)
  • Voltage: 230–240 V AC, integral LED
  • Bezel / body: chromium-plated metal; IP66 front
  • Terminals: screw
  • Approvals: UL, CSA, CE (IEC 60947-5-1)

5. Ordering & Compatibility

Complete pilot light — order as-is (no separate LED/lamp block). Color/voltage variants use different suffixes within XB4-BVMx / XB4-BVBx. Head-only + separate LED builds use the ZB4-BV body + ZBV LED block. Stocked by Schneider distributors (DigiKey, RS, Newark, Radwell).

6. Known Issues

No notable reliability issues; a mature integral-LED indicator. Catalog gotcha: this is an indicator light, not an audible buzzer or a pushbutton — and it is the 230-240 V AC variant, so don't wire it to 24 V.


2 sources
  1. XB4BVM3 — Harmony XB4 green pilot light 22mm 230-240V integral LED — se.com
  2. Harmony XB4 22mm metal indicators & pilot lights — se.com
About the Harmony XB4 range

Applies to every part of the range, not only the XB4-BVM3.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Certifications
UL, CSA, CE
Color
Green
Component type
Complete pilot light (indicator), plain lens
Cutout Diameter
22mm
Material
Metal bezel
Voltage
230-240V AC (integral LED)

Installation Quick Reference

Panel cutout: 22mm. Insert from the front, secure with mounting nut.

LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.

Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Troubleshooting

Light is dim or flickering

Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).

Light doesn't turn on

Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.

Quick Specs

Certifications
UL, CSA, CE
Color
Green
Component type
Complete pilot light (indicator), plain lens
Cutout Diameter
22mm
Material
Metal bezel

What People Are Saying

+

“Panel-mount buzzer in standard Harmony XB4 form factor. Continuous or pulsed tone. Mounts in the same 22mm cutout as buttons and indicators. Used for fault alerts, cycle completion, and operator atten”

Reddit r/PLC 27 upvotes View thread →