XB4BS8444

Active
UL LISTED CSA MARINE BV DNV LROS

Schneider XB4BS8444 Emergency Stop, Red Ø40 mm Mushroom, Turn to Release, 2 NC (Harmony XB4, metal)

Part number: B - S - 844
Schneider Electric XB4BS8444 — Schneider XB4BS8444 Emergency Stop, Red Ø40 mm Mushroom, Turn to Release, 2 NC (Harmony XB4, metal)

Schneider Harmony XB4 complete 22 mm emergency-stop push button: chromium-plated metal bezel, red Ø40 mm mushroom, trigger action and mechanical latching, turn to release, 2 NC positive-opening contacts; IP66–IP69K, UL 4X/13; ISO 13850 / IEC 60947-5-5.

Common Applications

Complete metal 22 mm emergency stop (red Ø40 mm mushroom, turn to release, 2 NC) for machine panels and safety-relay circuits; replaces the discontinued XB4BS542.

Research Notes

What it is

A complete 22 mm emergency-stop button from Schneider Electric's metal Harmony XB4 range: a chromium-plated metal bezel, a red Ø40 mm mushroom and two normally-closed contacts, ready to wire. Pushed, it latches (trigger action, mechanical latching); it is released by turning it. The contacts have positive opening, as an emergency stop requires.

It is made up of the ZB4BS844 head and a body with 2 NC contacts. Schneider names it as the replacement for the older XB4BS542 (discontinued January 2021) and for its AS-Interface e-stop ASISSLB4.

Key specifications (Schneider datasheet)

  • Operator: red mushroom Ø40 mm, unmarked; trigger action, mechanical latching, turn to release
  • Contacts: 2 NC, positive opening (IEC 60947-5-1 Annex K), slow-break; screw clamp terminals
  • Ratings: 3 A at 240 V and 6 A at 120 V (AC-15, A600); 0.27 A at 250 V DC (DC-13); Ith 10 A; Ui 600 V
  • Life: 300,000 mechanical cycles; 1,000,000 electrical cycles (AC-15, 2 A 230 V)
  • Protection: IP66, IP67, IP69, IP69K; UL Type 4X/13; IK06
  • Mounting: 22.5 mm hole; 40 × 47 × 82 mm
  • Temperature: −40 to +70 °C
  • Weight: 130 g
  • Standards: ISO 13850, IEC 60947-5-5, IEC 60204-1, UL 508, CSA C22.2 No 14; marine BV, DNV, Lloyd's Register
  • Codes: EAN 3389110959000; country of origin Czech Republic

Status and price

Active; "normally stocked in distribution" according to Schneider (November 2026). Schneider's list prices: €46.70 in Germany, €47.30 in the Netherlands, £42.05 in the UK.

Prices seen in November 2026 (much higher in the US than in Europe):

  • US: Next Day Automation $60; DigiKey about $81; RS $82.47; Zoro $97.16; Newark $148.75; eBay listings mostly $20–60
  • UK: BPX £37.78; RS £42.47
  • Europe: one-elec €23.90; Automation24 €30.40 (business price); Conrad €57.99; Mouser €69.53 (245 in stock)

Related parts

  • Head only: ZB4BS844 (red Ø40 mm, turn to release)
  • Other contact versions: XB4BS8442 (1 NC), XB4BS8445 (1 NO + 1 NC)
  • Same unit with Push-In terminals: XB4BS84445
  • Plastic equivalent: XB5AS8444 (Harmony XB5), cheaper
  • Other makers' equivalent named by users: ABB CE4T-10R-02 (plastic, 40 mm, turn to release)

Where it is used

  • Safety relay circuits: DigiKey's introduction to industrial safety relays feeds its demonstration circuit's 24 V through the XB4BS8444's two NC contacts into a Schneider XPSBAC14AP safety module.
  • Flight simulators: on a Russian forum, a builder chains several XB4BS8444 in series around a simulator cockpit to drop a 3-phase contactor with a 220 V coil. The forum's answer to whether e-stops are limited to 24 V: no such rule, but earth every metal part.
  • Replacement work: it is the part Schneider offers for the discontinued XB4BS542 and ASISSLB4.

Buying notes

  • Complete unit. Unlike the ZB4BS844 head, it already has its two NC contacts.
  • Metal vs plastic. Forum users point to the plastic XB5AS8444 as the cheaper Schneider equivalent.
  • Genuine or look-alike? Only about 40% of the marketplace listings we read that use "XB4BS8444" name Schneider. The rest are mostly brandless multi-code listings ("Emergency Stop Switch XB4BS8445 ZB4BS844 XB4BS8442 XB4BS8444/BS84441") or sold "for Schneider".
  • Prices vary widely: the same unit costs about €24–47 in Europe and $60–150 at US distributors.
  • Metal, whatever the listing says. Some shops call it plastic (Kempston's title, Automation24's material field, Zoro's "head material"). The bezel is chromium-plated metal and the collar Zamak; only the mushroom cap is plastic. Several marketplace listings also give France as the country of origin; Schneider gives the Czech Republic.

What users say

  • "An emergency-stop button with two NC contacts. Being a branded part, it is approved and meets the CE rules." (Amazon Spain, verified, November 2021)
  • "The quality is very good, industrial; it has two normally-closed contacts." (Amazon Spain, verified, August 2025)
  • "Very good price. Fast delivery. Everything without problems, as it should be." (Amazon Germany, verified, July 2026)
  • The genuine Amazon listing (B001ZRUE94) holds 4.8★ from 15–17 ratings. For the 1-NC sibling XB4BS8442 an eBay buyer wrote: "Very tough pushbutton, people do find a way to break them though."
9 sources
  1. Schneider Electric product page and datasheet: XB4BS8444 (November 2026) — Schneider Electric
  2. Schneider Electric UK: XB4BS542 discontinued, may be replaced by XB4BS8444 — Schneider Electric
  3. DigiKey TechForum: Introduction to the industrial safety relay (XB4BS8444 + XPSBAC14AP demo) — DigiKey TechForum
  4. Mastergrad forum: what voltage may an XB4 BS8444 e-stop carry (flight-simulator e-stop chain) — mastergrad.com
  5. ASUTP forum: XB4BS8444 and its cheaper equivalents (XB5AS8444, ABB CE4T-10R-02) — asutpforum.ru
  6. Amazon Spain: genuine XB4BS8444 listing and reviews — Amazon
  7. eBay: XB4BS8442 (1 NC sibling) buyer reviews — eBay
  8. RS US: XB4BS8444 price (November 2026) — RS
  9. Amazon: multi-code 'Emergency Stop Switch XB4BS8445 ZB4BS844 XB4BS8442 XB4BS8444…' look-alike listings (November 2026) — Amazon
About the Harmony XB4 range

Applies to every part of the range, not only the XB4BS8444.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Actuator Type
Mushroom Ø40 mm, red, unmarked
Bezel material
Chromium-plated metal; Zamak collar
Certifications
UL Listed, CSA; marine BV, DNV, LROS
Component type
complete unit (head ZB4BS844 + body with 2 NC)
Contact Configuration
2 NC (positive opening, IEC 60947-5-1 Annex K), slow-break, screw clamp
Country of origin
Czech Republic
Dimensions
40 × 47 × 82 mm
Ean
3389110959000
Electrical Life
1,000,000 cycles (AC-15, 2 A 230 V)
Enclosure type
UL Type 4X/13
Enriched by
schneider-decoder-2026-08-12
Head
ZB4BS844
Ik rating
IK06
IP Rating
IP66, IP67, IP69, IP69K
Lead time
29 Days
Manufacturer series
Harmony XB4
Mechanical Life
300,000 cycles
Mouser part number
996-XB4BS8444
Max Operating Temp
70°C
Min Operating Temp
-40°C
Panel cutout
22.5 mm
Plastic equivalent
XB5AS8444
Pn status
decoded
Push in version
XB4BS84445
Wireless Range
Harmony / Square D Class 9001
Rated current
3 A 240 V AC-15 (A600); 0.27 A 250 V DC-13 (Q600); Ith 10 A
Rated insulation voltage
600 V
Release
Turn to release
Replaces
XB4BS542, ASISSLB4 (discontinued 2021)
Rohs status
RoHS Compliant
Series description
Schneider Harmony XB4 complete 22mm pushbutton with chrome-plated METAL bezel and metal mounting collar (industrial IEC command switch)
Standards
ISO 13850, IEC 60947-5-5, IEC 60204-1, IEC 60947-5-1, UL 508, CSA C22.2 No 14, JIS C8201
Switching function
Trigger action, mechanical latching
Weight
130 g

Installation Quick Reference

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

Dimensions

Wiring Diagram

L T 21 22 NC (closed) opens on press

Troubleshooting

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Emergency Stop Push Button Repair on CP Bourg 3002 Perfect Binder

Just A Printer · watch on YouTube

Step by step

  1. Step 1
    1. Repairing the emergency stop on a CP Bourg 3002 perfect binder. 0:01
  2. Step 2
    2. Taking apart and refitting the Schneider Electric e-stop and its ZBE-102 contact block. 0:05
  3. Step 3
    3. The e-stop sits in the binder's cover. 0:11
  4. Step 4
    4. This one had been broken since the binder was bought. 0:12
  5. Step 5
    5. So it needs replacing. 0:17
  6. Step 6
    6. Removing a Schneider Electric push button is simple once you know where the release is. 0:24
  7. Step 7
    7. The head is held in a fixing collar behind the panel. 0:30
  8. Step 8
    8. Find the black release tab on the collar. 0:35
  9. Step 9
    9. Put a small screwdriver under the black tab and pull back. 0:39
  10. Step 10
    10. The fixing collar then comes off the button. 0:41
  11. Step 11
    11. The old collar and contact base, taken off the head. 0:47
  12. Step 12
    12. The new emergency stop: the contact block comes off this way. 0:54
  13. Step 13
    13. Lever the spring-loaded contact block off with the screwdriver. 0:57
  14. Step 14
    14. Again using the black tab: fit the head through the panel, tighten the collar screw, then snap the contact block back on. 1:04

Step text written from the video's narration.

Unboxing del pulsador parada de emergencia XB4BS8442

Schneider Electric Latinoamérica · watch on YouTube

Quick Specs

Max Operating Temp
70°C
Head
ZB4BS844
Release
Turn to release
Replaces
XB4BS542, ASISSLB4 (discontinued 2021)
Lead time
29 Days