XB4-BVB3
सक्रियATEX Green Indicator Light 24V
Schneider Harmony XB4 ATEX-certified green pilot light for Zone 1/21 hazardous areas.
सामान्य अनुप्रयोग
Found on control panels in oil refineries, chemical processing plants, and offshore platforms. The ATEX Zone 1 certification means it can operate where explosive gas is likely present during normal operation. Green indicates process running or system OK.
स्पेसिफिकेशन
|
ATEX Zone
The hazardous area classification. Zone 1 = gas likely present. Zone 2 = gas unlikely. Zone 21/22 = combustible dust.
|
Zone 1, Zone 21
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
ATEX, IECEx, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Explosion Group
The gas group the device is certified for. IIC covers hydrogen (most restrictive). IIB covers ethylene. IIA covers propane.
|
IIC
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Temperature Class
Maximum surface temperature. T6 (85°C) is most restrictive. T1 (450°C) is least. Must not exceed auto-ignition temp of the gas.
|
T6
|
इस आइकन वाले स्पेसिफिकेशन निर्माता के मूल स्रोत पृष्ठ से जुड़े हैं
आपको यह भी चाहिए
यह एक मॉड्यूलर घटक है। पूर्ण असेंबली के लिए, आपको ये भी चाहिए:
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
आयाम
समस्या निवारण
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
कहाँ से खरीदें
मूल्य सीमा
$16.69 — $47.99
4 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- ATEX Zone
- Zone 1, Zone 21
- Certifications
- ATEX, IECEx, CE
- Color
- Green
- Cutout Diameter
- 22mm
- Explosion Group
- IIC
उपयोगकर्ता क्या कह रहे हैं
“Schneider Electric indicators are reliable. Match the LED voltage to your PLC output. Follow IEC 60204-1 color coding — your maintenance team will appreciate consistent standards.”
और जानें
डेटा स्रोत
स्पेसिफिकेशन और उत्पाद डेटा निम्नलिखित संदर्भों से प्राप्त।