Schneider Electric · Harmony XB4 Series

ZB4BD5

Active

Schneider ZB4BD5 3-Position Spring-Return Selector Switch Head

Part number: ZB4 - B - D - 5
Schneider Electric Harmony XB4 Series
Schneider Electric ZB4BD5 — Schneider ZB4BD5 3-Position Spring-Return Selector Switch Head

Schneider Harmony XB4 22 mm metal selector switch operating head: black standard handle, 3 positions (±45°), spring return to centre. Head only — contact blocks and the body/fixing collar are ordered separately.

Common Applications

Selector switch head (3 positions, spring return to centre) for momentary left/right commands on 22 mm machine panels; needs a Harmony XB4 body with contacts (complete unit XB4BD53).

Research Notes

What it is

The operating head of a 22 mm metal selector switch from Schneider Electric's Harmony XB4 range. It has a chromium-plated metal bezel and a black standard handle with three positions, 45° apart. Turned left or right, the handle springs back to the centre when released. It suits momentary commands that must not stay switched on, e.g. Jog Left / Off / Jog Right or Lower / Stop / Raise.

It is a head only. It has no contacts and no fixing collar. You add a ZB4BZ body with contact blocks, or buy the complete unit XB4BD53 (ZB4BD5 + ZB4BZ103, two NO contacts).

Key specifications (Schneider datasheet)

  • Positions: 3, ±45°, spring return to centre from left and right
  • Handle: standard (short), black
  • Mechanical life: 1,000,000 cycles
  • Protection (head): IP67, IP69, IP69K; UL Type 4X/13
  • Mounting: 22 mm hole (22.5 mm recommended)
  • Weight: 40 g
  • Bodies / contacts: any Harmony XB4 body (ZB4BZ…) with ZBE contact blocks; the datasheet lists the possible electrical compositions
  • Codes: EAN 3389110888973; country of origin France

Status and price

Active; "normally stocked in distribution" according to Schneider (November 2026).

Prices seen in November 2026:

  • US: Amazon $19.43; Zoro $21.69; Newark $44.64; genuine listings on eBay $30–75
  • Europe: Automation24 €10.00 (business price); RS €13.92 (Netherlands, Belgium) to €19.72 (Spain); Farnell €16.73, UK £25.79; Mouser €18.58 (49 in stock); Conrad €20.99; eBay UK £9–12, Germany €7–10
  • Elsewhere: Russia 600–700 ₽ (Wildberries, Avito); Indonesia about Rp500,000 (Tokopedia)

Related parts

  • Complete unit with this head: XB4BD53 (ZB4BD5 + ZB4BZ103, 2 NO)
  • Other XB4 selector heads (black standard handle): ZB4BD2 (2 positions, stay put), ZB4BD3 (3 positions, stay put), ZB4BD4 (2 positions, spring return right to left), ZB4BD7 / ZB4BD8 (3 positions, stay put on one side, spring return from the other)
  • Bodies: ZB4BZ103 (2 NO), ZB4BZ101 (1 NO), ZB4BZ105 (1 NO + 1 NC)
  • Plastic equivalent: ZB5AD5 (Harmony XB5)
  • Russian-market equivalent: KEAZ OptiSignal D22 A4-S-5 (332221), "3 positions with return, metal, ZB4BD5", from about 400 ₽. Systeme Electric also sells it under the code ZB4BD5 in Russia.

Where it is used

  • As the head of XB4BD53 selector switches on machine panels, for jog or raise/lower functions that must not stay switched on.
  • It appears as a fleet-maintenance spare in a Portuguese public tender, next to other Harmony heads and a Schneider XALD324 control station.

Buying notes

  • Head only. It cannot be wired as it is. Order the body and contact blocks too, or the complete XB4BD53.
  • Genuine or look-alike? About half of the marketplace listings we read that use "ZB4BD5" name Schneider. The rest are mostly multi-code Chinese listings such as "Select Button ZB4BD2 BD3 BD4/BD5 XB4BD21/33/41/53/25" (country of origin China), or "ZB4-BD5" on AliExpress at $3–15.
  • Datasheet figures vs shop copy: some shops quote IP65 (old catalogue figure) or IK03 (the plastic XB5 rating) for this metal head. Use the datasheet.

What users say

  • "Perfetto — identical to the description." (Amazon, 5★, verified, Italy, April 2024)
  • "Functional." (Amazon Germany, 5★, verified, Italy, October 2023)
  • The genuine Amazon listing (B001GPCEMA) holds 5.0★ from 3 ratings.
7 sources
  1. Schneider Electric product page and datasheet: ZB4BD5 (November 2026) — Schneider Electric
  2. Harmony catalogue: XB4BD53 = ZB4BZ103 + ZB4BD5 — Schneider Electric (Mouser copy)
  3. KEAZ OptiSignal D22 A4-S-5 (332221), sold as the ZB4BD5 equivalent — KEAZ
  4. ZB4BD5 sold as Systeme Electric in Russia — SvetElektro
  5. Amazon: genuine ZB4BD5 listing and reviews — Amazon
  6. Newark: ZB4BD5 price (November 2026) — Newark
  7. Amazon: multi-code 'Select Button ZB4BD2 BD3 BD4/BD5 …' look-alike listings (November 2026) — Amazon
About the Harmony XB4 range

Applies to every part of the range, not only the ZB4BD5.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Actuator Function
3-position, spring return to centre from left and right (±45°)
Actuator Type
Selector, standard handle
Bezel
Chromium plated metal
Color
Black
Composition
Head only; complete unit XB4BD53 = ZB4BD5 + ZB4BZ103 (2 NO)
Contact Configuration
None (head only)
Country of origin
France
Cutout Diameter
22mm (22.5 mm recommended)
Ean
3389110888973
Environmental Rating
UL Type 4X/13
IP Rating
IP67, IP69, IP69K
Mechanical Life
1,000,000 cycles
Pn status
verified-catalogue
Weight
40 g

Installation Quick Reference

Panel cutout: 22mm (22.5 mm recommended). Align the selector positions with the desired panel markings before tightening.

Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 11 12 NO (open) press ↓

Troubleshooting

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

Mounting the Harmony XB4 ZB4 22mm Metal Push Button & Contacts | Schneider Electric Support

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Mounting a 22 mm Harmony XB4/ZB4 metal operator: you need the operator and a flat screwdriver. 0:13
  2. Step 2
    2. Hold the operator with its mounting collar and contact blocks attached, and take a flat screwdriver. 0:19
  3. Step 3
    3. Find the black tab on the collar and insert the screwdriver underneath it. 0:20
  4. Step 4
    4. Lever the tab up to release the head from the collar. 0:26
  5. Step 5
    5. Push the head through the 22 mm hole in the panel or door from the front. 0:31
  6. Step 6
    6. From behind, take the mounting collar. 0:37
  7. Step 7
    7. With its forks facing up, snap the collar onto the back of the head. 0:43
  8. Step 8
    8. The collar now holds in place on its own. 0:46
  9. Step 9
    9. Tighten the fixing screw (Schneider calls it the ground screw). 0:50
  10. Step 10
    10. Press down firmly while you turn the screw. 0:52
  11. Step 11
    11. Keep turning until the operator sits tight on the panel and no longer turns. 1:00

Step text written from the video's narration.

Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — Allied Electronics & Automation

RS Americas · watch on YouTube

Step by step

  1. Step 2
    2. The parts: a 22 mm Harmony XB4 metal operator (here an illuminated pushbutton) and a panel with 22 mm holes. 0:13
  2. Step 3
    3. Take the operator: the head with its body and contact blocks attached. 0:18
  3. Step 4
    4. Put a flat screwdriver under the black tab on the body. 0:20
  4. Step 5
    5. Lever the tab up - this releases the head from the body. 0:26
  5. Step 6
    6. Push the head through the hole in the panel or door from the front. 0:31
  6. Step 7
    7. Behind the panel, take the body (mounting collar) with its forks pointing up. 0:37
  7. Step 8
    8. Snap the body onto the back of the head. 0:42
  8. Step 9
    9. It now stays in place on its own. 0:45
  9. Step 10
    10. Tighten the fixing screw on the body firmly - a Phillips screwdriver is best. 0:48
  10. Step 11
    11. Keep turning until the operator is held tight against the panel. 0:52

Step text written from the video's narration.

Removing Contacts from Harmony XB4 22mm Metal Push Button | Schneider Electric

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Removing the contact blocks from a 22 mm Harmony XB4 metal operator. 0:12
  2. Step 2
    2. Loosen the fixing screw on the back of the collar. 0:18
  3. Step 3
    3. Once it is loose, find the black tab that holds the collar to the head. 0:22
  4. Step 4
    4. Insert the screwdriver under the tab and pull back to release the head. 0:29
  5. Step 5
    5. The collar with its contact blocks comes away from the head. 0:34

Step text written from the video's narration.

Mounting Contacts onto Harmony XB4 XB5 22mm Push Button | Schneider Electric Support

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Installing a contact block on the back of a 22 mm Harmony pushbutton (shown on a plastic XB5; the metal XB4 works the same way). 0:14
  2. Step 2
    2. Take the black fixing collar and line up the contact block with it. 0:20
  3. Step 3
    3. The contact block goes onto the back of the mounting collar. 0:25
  4. Step 4
    4. It snaps in with a forward motion … 0:30
  5. Step 5
    5. … and an angled push back towards you. A second block clips on the same way. 0:33

Step text written from the video's narration.

Schneider Electric ZB4-BD5 Selector Switch Head 3-Way | Telemecanique Harmony 22mm

Industrial Electrical Warehouse · watch on YouTube

Quick Specs

Actuator Function
3-position, spring return to centre from left and right (±45°)
Actuator Type
Selector, standard handle
Bezel
Chromium plated metal
Color
Black
Composition
Head only; complete unit XB4BD53 = ZB4BD5 + ZB4BZ103 (2 NO)