Schneider Electric · Harmony XB5 系列

ZB5AS844

在产
UL LISTED CSA BV DNV LROS

Schneider ZB5AS844 Emergency Stop Head, Red 40 mm Mushroom, Turn to Release

零件编号: ZB5 - A - S - 844
Schneider Electric Harmony XB5 系列
Schneider Electric ZB5AS844 — Schneider ZB5AS844 Emergency Stop Head, Red 40 mm Mushroom, Turn to Release

Schneider Harmony XB5 (plastic) 22 mm emergency-stop operating head: red Ø40 mm mushroom, trigger action and mechanical latching, turn to release. Head only — contact blocks (NC) and the fixing collar/body are ordered separately.

常见应用

Red Ø40 mm turn-to-release emergency-stop head (plastic Harmony XB5) for 22 mm machine panels; needs normally-closed contact blocks or a complete XB5AS84xx unit.

研究笔记

产品概述

施耐德电气 Harmony XB5 系列 22 mm 急停按钮的操作头:深灰色塑料边框和红色 Ø40 mm 蘑菇头。按下时锁定(触发动作,机械锁定);通过旋转释放。它是金属 XB4 头的塑料版本。

仅为操作头。 不含触点。需搭配 Harmony XB5 本体和常闭触点块,例如 XB5AZ141(2 NC),或购买完整单元如 XB5AS8444。经销商将 ZB5AS844 作为 XB5AS8444 的替换头提供。

关键规格(施耐德数据表)

  • 操作头: 红色蘑菇头 Ø40 mm,无标记;触发动作,机械锁定,旋转释放
  • 边框: 深灰色塑料(Harmony XB5)
  • 机械寿命: 300,000 次循环
  • 防护等级: IP66, IP67, IP69, IP69K;UL Type 4X/13;IK03
  • 安装: 22 mm 孔
  • 温度范围: −40 至 +70 °C
  • 重量: 46 g
  • 标准: ISO 13850(急停),IEC 60947-5-5,IEC 60204-1,IEC 60947-5-1,UL 508,CSA C22.2 No 14;船级社 BV, DNV, Lloyd's Register
  • 编码与保修: 18 个月;EAN 3389110906929;原产国捷克共和国(金属 XB4 部件来自法国)

状态与价格

在售;根据施耐德(2026 年 11 月)“通常在分销中备货”。RS 南非显示为缺货,并建议使用 ABB 1SFA 急停按钮;其他 RS 国家正常列出。

2026 年 11 月价格:

  • 美国: 亚马逊 $30.43;Superbreakers $51.99;Newark $69.15;eBay 正品 $16–37
  • 欧洲: Automation24 €14.60(商业价格);亚马逊荷兰、比利时、爱尔兰 €16–24;Conrad €22.99;eBay 英国 £17.53–21.13;Mouser 列出 €58.47(237 件库存)
  • 其他地区: 新加坡 S$46.86(亚马逊);土耳其 226–680 TL;印尼 Rp149,000–170,000

相关部件

  • 带此头的完整单元: XB5AS8444(带 ZB5AZ104);XB5AS8442 和 XB5AS8445(其他触点组合)
  • 触点块: XB5AZ141(2 NC);急停触点必须为常闭
  • 附件: ZBY8330(黄色 Ø90 mm “急停”标签);XALK178G / XALK01 外壳
  • 金属等效产品: ZB4BS844(Harmony XB4)
  • 俄罗斯市场等效产品: KEAZ OptiSignal D22 A5-ESTR(40 mm 急停头,旋转释放,塑料),作为 ZB5AS844 的等效产品销售

应用场景

  • 机器安全: 施耐德的 Preventa 机器安全指南将 ZB5AS844 列为塑料急停解决方案的首选头。其 Zelio 简单硬接线安全指南使用 ZB5AS844、XB5AZ141(2 NC)、ZBY8330 标签和 XALK178G 外壳构建机柜急停。
  • 模型铁路: 德国 1 轨距论坛的成员在模块布局中安装工业急停按钮(ZB5AS844 + ZBE203 触点 + XALK01 盒),以切断数字控制中心。

购买注意事项

  • 塑料,非金属。 唯一的亚马逊书面评论(意大利,2021 年,1★)抱怨照片显示为金属头,但收到的是塑料头。如需金属头,请订购 ZB4BS844。
  • 仅为操作头,需使用 NC 触点。 急停按钮必须断开电路。需使用常闭触点块(或完整的 XB5AS84xx 单元)。
  • 正品还是仿品? 我们阅读的约 40% 使用“ZB5AS844”名称的市场列表为施耐德产品。其余多为多编码中国列表(“急停开关 ZB5AT8643M ZB5AT84 ZB5AS834 …”,“ZB5AS844 红色急停 XB5AS8442/XB5AS8445 …”),原产国为中国。
  • 数据表数据与店铺描述: 许多店铺仍引用 IP65(旧目录数据)。IK03 适用于此塑料系列;金属 XB4 为 IK06。

用户评价

  • “与照片不符:照片显示为金属,实际为塑料。”(亚马逊,1★,已验证,意大利,2021 年 12 月)
  • 亚马逊正品列表(B0018L53T8)获得 3.5★,来自 3 个评分(亚马逊爱尔兰 8 个评分,4.2★)。
来源
  1. Schneider Electric product page and datasheet: ZB5AS844 (November 2026) — Schneider Electric
  2. Replacement switch for XB5AS8444: ZB5AS844 (2025) — DigiKey TechForum
  3. Notaustaster an ECoS? (2024): ZB5AS844 + ZBE203 + XALK01 on a model-railway layout — Spur 1 Gemeinschaftsforum
  4. Amazon: genuine ZB5AS844 listing and review — Amazon
  5. Newark: ZB5AS844 price (November 2026) — Newark
  6. RS Components: ZB5AS844 (RS 426-2808) — RS Components
  7. Amazon: multi-code emergency-stop look-alike listings (November 2026) — Amazon
关于Harmony XB5系列

适用于整个系列的所有部件,而不仅仅是ZB5AS844。

产品系列概述

Harmony XB5 是施耐德电气的塑料22毫米按钮、选择开关、钥匙开关、急停按钮和指示灯系列。该系列采用双重绝缘(Class II),配有深灰色边框,许多部件还提供浅灰色边框。它是金属Harmony XB4的塑料版本:功能相同,22毫米安装孔,且大部分备件通用。适用于30毫米安装孔的嵌入式版本以XB5F / ZB5F销售。

产品编号解析

  • 完整单元 = 主体 + 头部。 XB5AD33 是带有两个NO触点(ZB5AZ103)的主体加上头部(ZB5AD3)。您还可以单独购买固定环ZB5AZ009、触点模块和头部。
  • 灰色边框: 添加C0(XB5AD33 → XB5AD33C0)。
  • 插入式端子: 完整单元以5结尾(XB5AD335)。
  • 选择开关头部 与XB4相同:ZB5AD2 两位置保持;ZB5AD4 从右到左弹簧复位;ZB5AD3 三位置保持;ZB5AD5 弹簧复位至中心;ZB5AD7 / ZB5AD8 从左 / 右弹簧复位至中心。J 为长手柄(ZB5AJ3),G 为钥匙开关。
  • 带触点的主体: ZB5AZ101(1 NO),ZB5AZ102(1 NC),ZB5AZ103(2 NO),ZB5AZ104(2 NC),ZB5AZ105(1 NO + 1 NC),ZB5AZ141(1 NO + 2 NC)。

与Harmony XB4共享的部件

触点模块(ZBE101 NO,ZBE102 NC,ZBE203/204/205双触点,低功率ZBE1016)和通用LED灯模块(ZBVB1,ZBVG1,ZBVM1)在两个系列中使用相同的编号。铭牌支架(ZBZ32)、印刷铭牌(例如ZBY2385 "AUTO-O-HAND")、选择开关防护罩ZBZ2102和急停按钮防护罩ZBZ1605也是如此。XB5特有的部件包括固定环ZB5AZ009、盲塞ZB5SZ3、30毫米嵌入式套件ZB5AZ021 / ZB5AZ022、备用固定螺母ZB5AZ901和螺母工具ZB5AZ905。

系列规格(施耐德目录,2026年1月)

  • IP66、IP67、IP69、IP69K和UL Type 4X;−40至+70 °C;双重绝缘
  • IEC、UL、CSA、CCC、EAC、JIS;船级认证
  • 抗冲击:目录中一页提到“最高IK06”,另一页提到“最高IK03”,而我们检查的数据表(XB5AD33、XB5AD33N)显示为IK04
  • 耐化学性是该系列相对于金属XB4的卖点;在抗冲击、振动和耐热方面,施耐德推荐XB4(IK06)

安装

与XB4不同,头部通过前部的塑料螺母固定,使用施耐德的工具ZB5AZ905以2.2 N·m的扭矩拧紧。主体则从后面卡入。端子适用于0.34–1.5 mm²(AWG 22–16),每个端子可接两根线,扭矩为0.8–1.2 N·m。

注意:XB5…N是不同的本地系列

以N结尾的编号(XB5AD33N,“Harmony XB5N / XB7N”)是施耐德为印度市场提供的本地系列,而非全球通用的XB5部件:

XB5AD33(全球XB5)XB5AD33N(本地XB5N)
防护等级IP67、IP69、IP69KIP65(产品网页显示IP54)
工作温度−40至+70 °C−25至+70 °C
认证UL、CSA、BVCE
触点、额定值、100万次操作、Class II相同相同

两者均为施耐德正品。如需用于冲洗、户外或北美(UL)环境,请订购不带N的编号。施耐德中国也指出,XB5有进口和本地生产两种型号,而XB4仅为进口。

购买注意事项

  • 外观相似产品: XB5也被用作通用型号名称。亚马逊销售的无品牌“XB5”按钮和选择开关并非施耐德产品。
  • 评论: 一些印度商店页面带有模板化评论,不同产品上出现相同的五位评论者姓名和日期。我们忽略了这些评论。
  • 使用中的问题: 我们未发现XB5的常见故障模式(我们搜索了五种语言中关于螺母开裂或松动以及选择开关损坏的反馈)。
来源
  1. Harmony XB5 plastic Control and signaling units catalog (DIA5ED2121213EN, January 2026) — Schneider Electric
  2. XB5AD33 product page and datasheet — Schneider Electric India
  3. XB5AD33N (Harmony XB5N/XB7N, local range) product page and datasheet — Schneider Electric India
  4. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  5. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  6. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  7. Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts — Schneider Electric, YouTube

规格参数

Actuator Function
Trigger action, mechanical latching, turn to release
Actuator Type
Mushroom Ø40 mm, red
Bezel material
Dark grey plastic (Harmony XB5)
Certifications
UL Listed, CSA; BV, DNV, LROS
Color
Red
Component type
head/block (modular)
Composition
Head only; complete units XB5AS8444 / XB5AS8442 / XB5AS8445
Contact Configuration
None (head only; add NC contact blocks, e.g. XB5AZ141)
Country of origin
Czech Republic
Cutout Diameter
22mm
Ean
3389110906929
Enriched by
schneider-decoder-2026-08-12
Environmental Rating
UL Type 4X/13
Ik rating
IK03
IP Rating
IP66, IP67, IP69, IP69K
Manufacturer series
Harmony ZB5
Mechanical Life
300,000 cycles
Max Operating Temp
+70°C
Min Operating Temp
-40°C
Panel cutout
22mm
Pn status
decoded
Product type
Push Button Head
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony ZB5 22mm PLASTIC-bezel modular component (operator head OR contact block, for user assembly into an XB5 device)
Shopify id
8346403864889
Standards
ISO 13850, IEC 60947-5-5, IEC 60204-1, UL 508, CSA C22.2 No 14
Vendor
Schneider Electric
Warranty
18 months
Weight
46 g

安装快速参考

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

尺寸

Front 22mm cutout 40mm head Side panel terminals

接线图

L T 21 22 NC (closed) opens on press

故障排除

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts | Schneider Electric Support

Schneider Electric · 在YouTube上观看

逐步

  1. Step 1
    1. Installing a 22 mm plastic Harmony XB5 head with its contact blocks (here in a yellow XAL control-station box). 0:14
  2. Step 2
    2. Remove the plastic nut from the back of the head. 0:19
  3. Step 3
    3. Push the head through the hole from the front and screw the nut back on from behind, nice and tight. 0:26
  4. Step 4
    4. Then clip the mounting collar with its contact blocks onto the back of the head. 0:33

视频旁白中的步骤文本。

Removing Contacts from Harmony XB5/ZB5 22mm Push Button | Schneider Electric Support

Schneider Electric · 在YouTube上观看

快速规格

Actuator Function
Trigger action, mechanical latching, turn to release
Actuator Type
Mushroom Ø40 mm, red
Bezel material
Dark grey plastic (Harmony XB5)
Certifications
UL Listed, CSA; BV, DNV, LROS
Color
Red