XB4-BD3-COMP
현행 제품22mm 3-Position Selector Complete 2NO
Schneider XB4 complete 3-position maintained selector with 2x 1NO.
일반적인 용도
Pre-assembled Hand/Off/Auto selector. Two NO contacts — one for Hand position, one for Auto position. Off = both contacts open. The standard pump station selector for Schneider panels.
사양 목록
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
2x 1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
설치 빠른 참조
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
외형 치수
배선도
문제 해결
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
주요 사양
- Actuator Function
- Maintained
- Certifications
- UL, CSA, CE
- Contact Configuration
- 2x 1NO
- Cutout Diameter
- 22mm
- IP Rating
- IP66
사용자 후기
“Pre-assembled Hand/Off/Auto selector. Two NO contacts — one for Hand position, one for Auto position. Off = both contacts open. The standard pump station selector for Schneider panels.”