XB4-BVB4
현행 제품22mm Red Pilot Light Complete Unit
Schneider Harmony XB4 complete red pilot light.
일반적인 용도
Pre-assembled red fault indicator. Pairs with XB4-BVG3 green for standard run/fault status cluster. Complete unit means zero assembly — mount in panel, wire two leads, done.
사양 목록
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
외형 치수
문제 해결
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
구매처
가격 범위
$5.34 — $72.26
3개 대리점
주요 사양
- Certifications
- UL, CSA, CE
- Color
- Red
- Cutout Diameter
- 22mm
- Illumination
- Illuminated
- IP Rating
- IP66
사용자 후기
“Pre-assembled red fault indicator. Pairs with XB4-BVG3 green for standard run/fault status cluster. Complete unit means zero assembly — mount in panel, wire two leads, done.”