ZB4-BD2
AttivoHarmony XB4 2-Position Selector Switch Head
2-position maintained selector switch head for Schneider Harmony XB4 series. 22mm cutout, IP66. Standard handle.
Applicazioni Comuni
Two-position selector switch used for mode selection: manual/auto, local/remote, on/off. Common on HVAC control panels (fan speed selection), conveyor systems (forward/reverse), and pump stations (hand/off/auto — though that needs a 3-position variant). The maintained action means it stays in the selected position, giving the operator a visual indication of the current mode. Black handle is standard; keyed variants (ZB4-BG) prevent unauthorized mode changes.
Comunemente Presente Su
Specifiche
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO (with ZB4-BZ101)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
Le specifiche con questa icona sono collegate alla pagina fonte originale del produttore
Sarà Necessario Anche
Questo è un componente modulare. Per un assemblaggio completo, potrebbe servire anche:
Alternative Compatibili
Questi prodotti sono riferimenti incrociati funzionalmente equivalenti di altri produttori.
Guida Rapida all'Installazione
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensioni
Schema di Cablaggio
Risoluzione dei Problemi
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Dove Acquistare
Fascia di prezzo
$3.01 — $21.83
presso 4 distributori
Specifiche Rapide
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO (with ZB4-BZ101)
- Cutout Diameter
- 22mm
- IP Rating
- IP66
- Material
- Metal
Cosa Dicono gli Utenti
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
Approfondisci
Fonti Dati
Specifiche e dati prodotto tratti dalle seguenti fonti.