929002422801
在产Hue Wall Switch Module
Philips Hue Wall Switch Module — converts any dumb switch to smart.
常见应用
Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.
开放性与可改装性
Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.
规格参数
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
Hardwired (neutral wire required)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Hue Bridge, Home Assistant, Zigbee2MQTT
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
安装快速参考
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses Hardwired (neutral wire required) battery. Expected life: 1-2 years. Low battery notification via the app.
尺寸
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Battery Type
- Hardwired (neutral wire required)
- Smart Home Integrations
- Hue Bridge, Home Assistant, Zigbee2MQTT
- Protocol
- Zigbee 3.0
用户评价
“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”