929002422801
ActiveHue Wall Switch Module
Philips Hue Wall Switch Module — converts any dumb switch to smart.
Common Applications
Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.
Research Notes
1. Overview
The Philips Hue Wall Switch Module (929002422801, model RDM002) is a small battery-powered (CR2032 coin cell) Zigbee device that installs inside the wall box behind an existing light switch. It reads the position/toggle of your existing dumb wall switch and sends Zigbee 3.0 commands to Hue lights — so a normal wall switch can control Hue scenes without the switch cutting power to (and "bricking" the control of) the smart bulbs. It needs no neutral wire and no rewiring — that battery-powered, retrofit-friendly design is its whole point. One module supports one or two switch inputs; battery lasts several years. (Data-quality note: the stored "Hardwired (neutral wire required)" is incorrect — this device is coin-cell powered and needs no neutral/hardwiring.)
2. User Sentiment
Very popular as the fix for the classic Hue problem — "someone flipped the wall switch and now the app can't control the bulb." Praised for easy retrofit (behind existing switches, QR-code setup) and multi-year battery. Caveats: it fits in the wall box (space can be tight), works best with momentary/standard toggle switches (configurable behaviors), and it's part of the Hue/Zigbee ecosystem (Hue Bridge recommended; also pairs with Home Assistant / Zigbee2MQTT).
3. Real-World Applications
Retrofitting existing wall switches into Hue controllers — keep the physical switch usable (guests, habit) while the Hue bulbs stay powered and app/voice-controllable; map single/double press and on/off to Hue scenes.
4. Technical Specifications
- Type: Zigbee retrofit wall-switch module (behind existing switch), model RDM002
- Power: CR2032 coin cell — multi-year life; no neutral, no hardwiring
- Protocol: Zigbee 3.0
- Inputs: 1 or 2 switch inputs (single/double gang)
- Ecosystem: Hue Bridge (recommended), Home Assistant, Zigbee2MQTT
- Setup: QR-code pairing via Hue app
5. Ordering & Compatibility
Sold singly or in 2-packs (929002422801 is the module). Works with existing toggle/rocker switches wired into the module; a Hue Bridge gives the full experience (also works on generic Zigbee coordinators via HA/Z2MQTT). Confirm wall-box depth for the module. Not to be confused with mains-wired smart relay modules — this one is battery/Zigbee.
6. Known Issues / DQ
- DQ: stored power "Hardwired (neutral wire required)" is wrong — it's CR2032 battery, no neutral. Corrected here.
- Practical care: tight wall-box fit, switch-type/behavior configuration, coin-cell replacement over years, and it relies on the Zigbee network/Hue Bridge for control.
2 sources
- Philips Hue Wall Switch Module — battery, behind existing switch — philips-hue.com
- First look: Philips Hue Wall Switch Module (coin-cell battery) — hueblog.com
Openness & Hackability
Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.
Specifications
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
|
|
Installation
|
Behind existing wall switch (in wall box); 1 or 2 switch inputs
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Hue Bridge, Home Assistant, Zigbee2MQTT
|
|
Model
|
RDM002
|
|
Pn note
|
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Installation Quick Reference
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 coin cell (multi-year) — NO neutral / no hardwiring required battery. Expected life: 1-2 years. Low battery notification via the app.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$34.54 — $170.03
across 2 sellers in US dollars
Quick Specs
- Battery Type
- CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
- Installation
- Behind existing wall switch (in wall box); 1 or 2 switch inputs
- Smart Home Integrations
- Hue Bridge, Home Assistant, Zigbee2MQTT
- Model
- RDM002
- Pn note
- Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
What People Are Saying
“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”