Philips Hue · Hue Seri

929002422801

Aktif

Hue Wall Switch Module

Philips Hue Hue Seri Introduced circa 2021

Philips Hue Wall Switch Module — converts any dumb switch to smart.

Yaygın Uygulamalar

Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.

Araştırma Notları

1. Overview

The Philips Hue Wall Switch Module (929002422801, model RDM002) is a small battery-powered (CR2032 coin cell) Zigbee device that installs inside the wall box behind an existing light switch. It reads the position/toggle of your existing dumb wall switch and sends Zigbee 3.0 commands to Hue lights — so a normal wall switch can control Hue scenes without the switch cutting power to (and "bricking" the control of) the smart bulbs. It needs no neutral wire and no rewiring — that battery-powered, retrofit-friendly design is its whole point. One module supports one or two switch inputs; battery lasts several years. (Data-quality note: the stored "Hardwired (neutral wire required)" is incorrect — this device is coin-cell powered and needs no neutral/hardwiring.)

2. User Sentiment

Very popular as the fix for the classic Hue problem — "someone flipped the wall switch and now the app can't control the bulb." Praised for easy retrofit (behind existing switches, QR-code setup) and multi-year battery. Caveats: it fits in the wall box (space can be tight), works best with momentary/standard toggle switches (configurable behaviors), and it's part of the Hue/Zigbee ecosystem (Hue Bridge recommended; also pairs with Home Assistant / Zigbee2MQTT).

3. Real-World Applications

Retrofitting existing wall switches into Hue controllers — keep the physical switch usable (guests, habit) while the Hue bulbs stay powered and app/voice-controllable; map single/double press and on/off to Hue scenes.

4. Technical Specifications

  • Type: Zigbee retrofit wall-switch module (behind existing switch), model RDM002
  • Power: CR2032 coin cell — multi-year life; no neutral, no hardwiring
  • Protocol: Zigbee 3.0
  • Inputs: 1 or 2 switch inputs (single/double gang)
  • Ecosystem: Hue Bridge (recommended), Home Assistant, Zigbee2MQTT
  • Setup: QR-code pairing via Hue app

5. Ordering & Compatibility

Sold singly or in 2-packs (929002422801 is the module). Works with existing toggle/rocker switches wired into the module; a Hue Bridge gives the full experience (also works on generic Zigbee coordinators via HA/Z2MQTT). Confirm wall-box depth for the module. Not to be confused with mains-wired smart relay modules — this one is battery/Zigbee.

6. Known Issues / DQ

  • DQ: stored power "Hardwired (neutral wire required)" is wrong — it's CR2032 battery, no neutral. Corrected here.
  • Practical care: tight wall-box fit, switch-type/behavior configuration, coin-cell replacement over years, and it relies on the Zigbee network/Hue Bridge for control.

Kaynak
  1. Philips Hue Wall Switch Module — battery, behind existing switch — philips-hue.com
  2. First look: Philips Hue Wall Switch Module (coin-cell battery) — hueblog.com

Açıklık ve Değiştirilebilirlik

Zigbee2MQTT Uyumlu

Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.

Teknik Özellikler

Battery Type
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
Installation
Behind existing wall switch (in wall box); 1 or 2 switch inputs
Smart Home Integrations
Hue Bridge, Home Assistant, Zigbee2MQTT
Model
RDM002
Pn note
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
Protocol
Zigbee 3.0

Hızlı Montaj Kılavuzu

Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.

Battery: Uses CR2032 coin cell (multi-year) — NO neutral / no hardwiring required battery. Expected life: 1-2 years. Low battery notification via the app.

Boyutlar

Sorun Giderme

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

Nereden Satın Alınır

Fiyat aralığı

$34.54 — $170.03

across 2 sellers in US dollars

Kısa Teknik Özellikler

Battery Type
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
Installation
Behind existing wall switch (in wall box); 1 or 2 switch inputs
Smart Home Integrations
Hue Bridge, Home Assistant, Zigbee2MQTT
Model
RDM002
Pn note
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).

Kullanıcı Görüşleri

•

“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”

Reddit r/homeassistant 16 olumlu oy Konuyu görüntüle →