929002422801
सक्रियHue Wall Switch Module
Philips Hue Wall Switch Module — converts any dumb switch to smart.
सामान्य अनुप्रयोग
Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.
खुलापन और अनुकूलन क्षमता
Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.
स्पेसिफिकेशन
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
|
|
Installation
|
Behind existing wall switch (in wall box); 1 or 2 switch inputs
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Hue Bridge, Home Assistant, Zigbee2MQTT
|
|
Model
|
RDM002
|
|
Pn note
|
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
इंस्टॉलेशन त्वरित संदर्भ
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 coin cell (multi-year) — NO neutral / no hardwiring required battery. Expected life: 1-2 years. Low battery notification via the app.
आयाम
समस्या निवारण
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
कहाँ से खरीदें
मूल्य सीमा
$34.54 — $170.03
2 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- Battery Type
- CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
- Installation
- Behind existing wall switch (in wall box); 1 or 2 switch inputs
- Smart Home Integrations
- Hue Bridge, Home Assistant, Zigbee2MQTT
- Model
- RDM002
- Pn note
- Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
उपयोगकर्ता क्या कह रहे हैं
“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”