929002422801
ActivHue Wall Switch Module
Philips Hue Wall Switch Module — converts any dumb switch to smart.
Aplicații frecvente
Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.
Deschidere și modificabilitate
Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.
Specificații
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
|
|
Installation
|
Behind existing wall switch (in wall box); 1 or 2 switch inputs
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Hue Bridge, Home Assistant, Zigbee2MQTT
|
|
Model
|
RDM002
|
|
Pn note
|
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Referință rapidă de instalare
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 coin cell (multi-year) — NO neutral / no hardwiring required battery. Expected life: 1-2 years. Low battery notification via the app.
Dimensiuni
Depanare
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
De unde cumpărați
Interval de preț
$34.54 — $170.03
la 2 distribuitori
Specificații rapide
- Battery Type
- CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
- Installation
- Behind existing wall switch (in wall box); 1 or 2 switch inputs
- Smart Home Integrations
- Hue Bridge, Home Assistant, Zigbee2MQTT
- Model
- RDM002
- Pn note
- Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
Ce spun utilizatorii
“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”