929002422801
ใช้งานอยู่Hue Wall Switch Module
Philips Hue Wall Switch Module — converts any dumb switch to smart.
การใช้งานทั่วไป
Mounts behind an existing wall switch. Keeps constant power to Hue bulbs while making the existing physical switch a smart trigger. Solves the biggest Hue problem: family members turning off the wall switch and killing the smart bulbs. Zigbee connected to Hue Bridge.
บันทึกการวิจัย
1. Overview
The Philips Hue Wall Switch Module (929002422801, model RDM002) is a small battery-powered (CR2032 coin cell) Zigbee device that installs inside the wall box behind an existing light switch. It reads the position/toggle of your existing dumb wall switch and sends Zigbee 3.0 commands to Hue lights — so a normal wall switch can control Hue scenes without the switch cutting power to (and "bricking" the control of) the smart bulbs. It needs no neutral wire and no rewiring — that battery-powered, retrofit-friendly design is its whole point. One module supports one or two switch inputs; battery lasts several years. (Data-quality note: the stored "Hardwired (neutral wire required)" is incorrect — this device is coin-cell powered and needs no neutral/hardwiring.)
2. User Sentiment
Very popular as the fix for the classic Hue problem — "someone flipped the wall switch and now the app can't control the bulb." Praised for easy retrofit (behind existing switches, QR-code setup) and multi-year battery. Caveats: it fits in the wall box (space can be tight), works best with momentary/standard toggle switches (configurable behaviors), and it's part of the Hue/Zigbee ecosystem (Hue Bridge recommended; also pairs with Home Assistant / Zigbee2MQTT).
3. Real-World Applications
Retrofitting existing wall switches into Hue controllers — keep the physical switch usable (guests, habit) while the Hue bulbs stay powered and app/voice-controllable; map single/double press and on/off to Hue scenes.
4. Technical Specifications
- Type: Zigbee retrofit wall-switch module (behind existing switch), model RDM002
- Power: CR2032 coin cell — multi-year life; no neutral, no hardwiring
- Protocol: Zigbee 3.0
- Inputs: 1 or 2 switch inputs (single/double gang)
- Ecosystem: Hue Bridge (recommended), Home Assistant, Zigbee2MQTT
- Setup: QR-code pairing via Hue app
5. Ordering & Compatibility
Sold singly or in 2-packs (929002422801 is the module). Works with existing toggle/rocker switches wired into the module; a Hue Bridge gives the full experience (also works on generic Zigbee coordinators via HA/Z2MQTT). Confirm wall-box depth for the module. Not to be confused with mains-wired smart relay modules — this one is battery/Zigbee.
6. Known Issues / DQ
- DQ: stored power "Hardwired (neutral wire required)" is wrong — it's CR2032 battery, no neutral. Corrected here.
- Practical care: tight wall-box fit, switch-type/behavior configuration, coin-cell replacement over years, and it relies on the Zigbee network/Hue Bridge for control.
แหล่งที่มา
- Philips Hue Wall Switch Module — battery, behind existing switch — philips-hue.com
- First look: Philips Hue Wall Switch Module (coin-cell battery) — hueblog.com
ความเปิดกว้างและความสามารถในการปรับแต่ง
Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.
ข้อมูลจำเพาะ
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
|
|
Installation
|
Behind existing wall switch (in wall box); 1 or 2 switch inputs
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Hue Bridge, Home Assistant, Zigbee2MQTT
|
|
Model
|
RDM002
|
|
Pn note
|
Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
คู่มือการติดตั้งอย่างรวดเร็ว
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 coin cell (multi-year) — NO neutral / no hardwiring required battery. Expected life: 1-2 years. Low battery notification via the app.
ขนาด
การแก้ไขปัญหา
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
สถานที่จำหน่าย
ช่วงราคา
$34.54 — $170.03
across 2 sellers in US dollars
ข้อมูลจำเพาะอย่างย่อ
- Battery Type
- CR2032 coin cell (multi-year) — NO neutral / no hardwiring required
- Installation
- Behind existing wall switch (in wall box); 1 or 2 switch inputs
- Smart Home Integrations
- Hue Bridge, Home Assistant, Zigbee2MQTT
- Model
- RDM002
- Pn note
- Corrected: battery-powered (CR2032), retrofit behind existing switch, no neutral. Stored Hardwired/neutral-required was wrong (opposite of the product feature).
สิ่งที่ผู้คนพูดถึง
“Standard Zigbee. Works with Z2M. Installs behind the wall plate — the existing switch becomes a Zigbee button.”