Schneider Electric · Harmony XB4 Series

XB4BA21

Active
UL 508 CSA C22.2 NO 14 IEC 60947-5-1 BV DNV LROS

22mm Black Complete Push Button 1NO

Part number: B - A - 2
Schneider Electric Harmony XB4 Series Introduced circa 2003
Schneider Electric XB4BA21 — 22mm Black Complete Push Button 1NO

Schneider XB4BA21 — complete black push button.

Common Applications

Black momentary (spring-return) start, reset or jog button for 22 mm machine control panels: the NO contact closes only while the button is pressed.

Research Notes

What it is

A complete 22 mm metal pushbutton from Schneider Electric's Harmony XB4 range. It has a chromium-plated metal bezel, a black flush (level with the bezel), unmarked button, and spring return: it is only "on" while pressed. The body has one normally-open (NO) contact. It is Schneider's plain "start / reset / jog" button, also sold under the older Telemecanique and Square D names.

The unit is the head ZB4BA2 on the body ZB4BZ101 (fixing collar with a ZBE101 contact block). Both are sold separately as spare parts. It replaces the old Telemecanique XB2BA21: Harmony XB4/XB5 took over from XB2 after 1999. The two ranges' parts do not fit each other.

Key specifications (Schneider datasheet)

  • Contact: 1 NO, slow-break, terminals 13-14; no positive opening
  • Ratings: AC-15: 6 A at 120 V, 3 A at 240 V (A600); DC-13: 0.55 A at 125 V, 0.27 A at 250 V, 0.1 A at 600 V (Q600); Ith 10 A; Ui 600 V; short-circuit protection 10 A gG fuse
  • Operation: 3.8 N; contact changes after 2.6 mm, total travel 4.3 mm
  • Life: 10,000,000 mechanical cycles; 1,000,000 electrical cycles at AC-15 2 A / 230 V
  • Protection: IP66, IP67, IP69, IP69K; UL Type 4X/13; IK06
  • Mounting: 22 mm hole (22.5 mm recommended); screw-clamp terminals, 1 × 0.22 to 2 × 2.5 mm²; tightening torque 0.8–1.2 N·m
  • Size and weight: 47 × 30 × 52 mm, 80 g
  • Temperature: −40 to +70 °C
  • Robustness: vibration 5 gn; shock 30 gn (18 ms) / 50 gn (11 ms)
  • Approvals: UL 508, CSA C22.2 No 14, IEC 60947-5-1/-5-4/-5-5, JIS C8201; marine BV, DNV, Lloyd's Register
  • Codes and warranty: 18 months; EAN 3389110886948; country of origin France

Status and price

Active; "normally stocked in distribution" according to Schneider (November 2026).

Prices seen in October–November 2026:

  • US: Amazon $30.76; Zoro $28.35; Newark $54.82 for one ($39.75 at 10+); Superbreakers $19.99; genuine listings on eBay $11–50
  • Europe: Automation24 €11.20 (business price); Amazon Netherlands €15.10, Belgium €15.05; RS UK £15.00; Farnell France €17.94; Conrad €19.99; Mouser €24.34 (122 in stock); eBay Germany €7–12
  • Asia-Pacific: element14 Singapore S$21.02, Malaysia RM86.24, New Zealand $77.15; Amazon Singapore S$54.13; Japan ¥2,483 (Farnell); Indonesia Rp119,500–141,000 (Tokopedia)
  • Elsewhere: Turkey 218–657 TL (Hepsiburada); Russia: KEAZ's equivalent about 906 ₽

Related parts

  • Same button, other contacts: XB4BA22 (1 NC); XB4BA25 (1 NO + 1 NC)
  • Other colours: XB4BA11 (white), XB4BA31 (green), XB4BA42 (red, 1 NC), XB4BA51 (yellow), XB4BA61 (blue)
  • Spare parts: head ZB4BA2; body ZB4BZ101; contact block ZBE101
  • Plastic equivalent: XB5AA21 (Harmony XB5)
  • Replaces: Telemecanique XB2BA21 (not interchangeable)
  • Russian-market equivalent: KEAZ OptiSignal D22 C4-P-210 (332166), which KEAZ sells as the XB4BA21 equivalent

Where it is used

  • On machine control panels as a start, reset or jog button. An Italian PLC forum recommends it for heavy machine-panel use, with the advice to switch a pump through a contactor rather than directly.
  • A Swedish electronics forum calls it "the natural choice" for a small spring-return button in a 230 V circuit.
  • French home-automation users (Gladys Assistant) cite it as the model of a momentary dashboard button.
  • Schneider used the XB4BA21 as one of four sample parts when it launched its Harmony customisation (sample-request) platform in November 2022.

Buying notes

  • Genuine or look-alike? About half of the marketplace listings we read that use "XB4BA21" name Schneider. That is a much better share than for other XB4 parts.
    • The look-alikes include "XB4BA Metal Series Flat Push Button XB4BA21 220V/380V AC/DC" and multi-code listings ("XB4BA31 XB4BA11 XB4BA42 XB4BA51 XB4BA61 …"). Some even copy Schneider's composition "XB4BA21=ZB4BA2+ZB4BZ101" in the title while stating China as country of origin.
    • The ManHua "XB4-BA21" is sold in Russia under the same code.
    • Genuine units come from France with the EAN 3389110886948.
  • It is black. One machine-written shop article calls the XB4BA21 "green"; the green one is the XB4BA31.
  • Datasheet figures vs shop copy:
    • Several shops quote IP65 (old catalogue figure) or IK03 (the rating of the plastic XB5). The datasheet gives IP66–IP69K and IK06.
    • Many shops give "5,000,000 operations" mechanical life: that is the figure in Schneider's older datasheets (2011, 2014). The current datasheet says 10 million mechanical cycles. Others give "1,000,000 cycles" as if it were mechanical; that is the electrical figure.
  • Not 230/380 V rated "for motors". The contact is a control contact (3 A at 240 V AC-15). Loads such as pumps or motors need a contactor.

What users say

  • "Très bien — Convient parfaitement" (Amazon, 5★, verified, Belgium, June 2025)
  • "Simple and easy — I am very happy with this product" (Amazon, 5★, verified, UK, March 2026)
  • The genuine Amazon listing (B0018L3KHU) holds 5.0★ from 10–13 ratings across Amazon stores.
11 sources
  1. Schneider Electric product page and datasheet: XB4BA21 (October 2026) — Schneider Electric
  2. RS: End of Life of the XB/ZB2 range — XB2BA21 → XB4BA21 equivalence — RS Components (Scribd copy)
  3. Harmony Configurator release notes #41 (Nov 2022): XB4BA21 on the sample-request platform — Schneider Electric Community
  4. Pulsante per avviamento elettropompa (2015) — PLC Forum (Italy)
  5. Söker en liten dubbelisolerad och återfjädrande tryckknapp (2022) — Elektronikforumet (Sweden)
  6. Bouton poussoir sur le tableau de bord (2022) — Gladys Assistant community
  7. KEAZ OptiSignal D22 C4-P-210 (332166), sold as the XB4BA21 equivalent — KEAZ
  8. Amazon: genuine XB4BA21 listing and reviews — Amazon
  9. Newark: XB4BA21 price tiers (November 2026) — Newark
  10. RS Components: XB4BA21 (RS 330-8616) — RS Components
  11. Amazon: 'XB4BA21 220V/380V' and multi-code look-alike listings (November 2026) — Amazon
About the Harmony XB4 range

Applies to every part of the range, not only the XB4BA21.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Actuator Function
Spring return (momentary)
Actuator Type
Flush
Bezel
Chromium plated metal
Certifications
UL 508, CSA C22.2 No 14, IEC 60947-5-1; BV, DNV, LROS
Color
Black
Composition
ZB4BA2 head + ZB4BZ101 body
Contact Configuration
1NO
Country of origin
France
Cutout Diameter
22mm (22.5 mm recommended)
Dimensions
47 × 30 × 52 mm
Ean
3389110886948
Electrical Life
1,000,000 cycles (AC-15, 2 A/230 V)
Environmental Rating
UL Type 4X/13
Ik rating
IK06
IP Rating
IP66, IP67, IP69, IP69K
Material
Metal
Mechanical Life
10,000,000 cycles
Operating Force
3.8 N
Max Operating Temp
+70°C
Min Operating Temp
-40°C
Operating travel
2.6 mm (contact), 4.3 mm total
Rating ac15
6 A/120 V, 3 A/240 V
Rating dc13
0.55 A/125 V, 0.27 A/250 V, 0.1 A/600 V
Terminal Type
Screw clamp (13-14)
Warranty
18 months
Weight
80 g

Installation Quick Reference

Panel cutout: 22mm (22.5 mm recommended). Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 11 12 NO (open) press ↓

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Mounting the Harmony XB4 ZB4 22mm Metal Push Button & Contacts | Schneider Electric Support

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Mounting a 22 mm Harmony XB4/ZB4 metal operator: you need the operator and a flat screwdriver. 0:13
  2. Step 2
    2. Hold the operator with its mounting collar and contact blocks attached, and take a flat screwdriver. 0:19
  3. Step 3
    3. Find the black tab on the collar and insert the screwdriver underneath it. 0:20
  4. Step 4
    4. Lever the tab up to release the head from the collar. 0:26
  5. Step 5
    5. Push the head through the 22 mm hole in the panel or door from the front. 0:31
  6. Step 6
    6. From behind, take the mounting collar. 0:37
  7. Step 7
    7. With its forks facing up, snap the collar onto the back of the head. 0:43
  8. Step 8
    8. The collar now holds in place on its own. 0:46
  9. Step 9
    9. Tighten the fixing screw (Schneider calls it the ground screw). 0:50
  10. Step 10
    10. Press down firmly while you turn the screw. 0:52
  11. Step 11
    11. Keep turning until the operator sits tight on the panel and no longer turns. 1:00

Step text written from the video's narration.

Removing Contacts from Harmony XB4 22mm Metal Push Button | Schneider Electric

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Removing the contact blocks from a 22 mm Harmony XB4 metal operator. 0:12
  2. Step 2
    2. Loosen the fixing screw on the back of the collar. 0:18
  3. Step 3
    3. Once it is loose, find the black tab that holds the collar to the head. 0:22
  4. Step 4
    4. Insert the screwdriver under the tab and pull back to release the head. 0:29
  5. Step 5
    5. The collar with its contact blocks comes away from the head. 0:34

Step text written from the video's narration.

Mounting Contacts onto Harmony XB4 XB5 22mm Push Button | Schneider Electric Support

Schneider Electric · watch on YouTube

Step by step

  1. Step 1
    1. Installing a contact block on the back of a 22 mm Harmony pushbutton (shown on a plastic XB5; the metal XB4 works the same way). 0:14
  2. Step 2
    2. Take the black fixing collar and line up the contact block with it. 0:20
  3. Step 3
    3. The contact block goes onto the back of the mounting collar. 0:25
  4. Step 4
    4. It snaps in with a forward motion … 0:30
  5. Step 5
    5. … and an angled push back towards you. A second block clips on the same way. 0:33

Step text written from the video's narration.

XB4BA21 Кнопка управления черная, 22мм, контакт NO, Schneider Electric ZB4 BZ101

ПРОМЭЛЕКТРИКА · watch on YouTube

Step by step

  1. Step 1
    1. The Harmony XB4 BA flush head (a red one is shown; the XB4BA21 has the black cap). 0:58

Step text written from the video's narration.

Montaggio del Pulsante Harmony XB4 Filo Pannello in Metallo | Schneider Electric Italia

Schneider Electric Italia · watch on YouTube

How to Mount Schneider Electric Harmony XB4 Flush Pushbuttons – Allied Electronics & Automation

RS Americas · watch on YouTube

Quick Specs

Actuator Function
Spring return (momentary)
Actuator Type
Flush
Bezel
Chromium plated metal
Certifications
UL 508, CSA C22.2 No 14, IEC 60947-5-1; BV, DNV, LROS
Color
Black

What People Are Saying

•

“Complete black button for auxiliary functions. Horn silence, counter reset, lamp test. Black has no IEC safety meaning — keeps colored buttons visually distinct.”

Reddit r/PLC 6 upvotes View thread →