ZB4-BW333-230
現行品Schneider ZB4BW333 Green Flush Illuminated Pushbutton Head (Harmony XB4, head-only)
Schneider XB4 illuminated green for 230V circuits.
主な用途
For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.
研究ノート
1. Overview
The Schneider Electric ZB4BW333 is a 22 mm metal green flush illuminated pushbutton head for the Harmony XB4 / ZB4 system — a spring-return (momentary), flush, illuminated operator head. As a ZB4 part it is the head only: to build a working illuminated button you add a separate ZBV LED module (voltage-specific) and a ZB4 contact block, mounted on the body (the complete factory unit is XB4-BW333 + LED). (Data-quality note: this was cataloged as "230 V AC" (PN "ZB4-BW333-230") — but the head is voltage-independent; the LED voltage is set by the separate ZBV module you fit (e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V, ZBV-B3/B1 = 24 V). The "-230" suffix is bogus and the 230 V is not inherent to ZB4BW333.)
2. User Sentiment
Harmony XB4 metal illuminated heads are standard, robust industrial operators. The key practical point (and this entry's error) is the modular design: the ZB4-BW head, the ZBV LED module (choose the voltage/color), and the contact block are ordered separately — the head alone doesn't light or switch.
3. Real-World Applications
An illuminated green (start/run/on) flush pushbutton on machine and control panels — the integral LED (once a ZBV module is fitted at the correct voltage) shows energized/active state; a contact block drives a contactor/PLC input.
4. Technical Specifications
- Type: Harmony XB4/ZB4 metal illuminated pushbutton head (head-only), 22 mm
- Actuator: flush, momentary (spring-return); green; illuminated (LED module separate)
- LED voltage: not inherent to the head — set by the separate ZBV LED module (24 / 120 / 230 V options)
- Contacts: none integral — add a ZB4 contact block
- Cutout: 22 mm; metal (chrome) bezel; IP66
- Approvals: UL, CSA, CE
- Complete unit: XB4-BW333 (+ LED module + contacts)
5. Ordering & Compatibility
Order the ZB4BW333 head plus a ZBV LED module (pick the voltage — e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V green, ZBV-B3 = 24 V green) and a ZB4 contact block — or the complete XB4-BW333. Fits 22 mm cutouts, XB4/XB5 system. BW = illuminated flush; color digit selects green.
6. Known Issues / DQ
- DQ: the head is voltage-independent — "230 V" is not inherent to ZB4BW333 (the "-230" suffix is bogus); voltage is set by the separate ZBV LED module. Corrected here. It's also a head (no integral LED/contact).
- Practical care: order head + correct-voltage ZBV LED module + contact block; confirm the 22 mm cutout.
Harmony XB4シリーズについて
シリーズ全体に適用され、ZB4-BW333-230 のみに限りません。
製品ラインについて
Harmony XB4は、Schneider Electricの金属製22 mmプッシュボタン、セレクタスイッチ、キースイッチ、非常停止スイッチ、パイロットランプのシリーズで、クロムメッキ(または黒色)の金属製ベゼルを備えています。古い部品や多くの店舗では、Telemecaniqueの名称がまだ使用されています。同じ機能を持つ30 mm埋め込み型バージョン(XB4F / ZB4F)も存在し、Harmony XB5はこのシリーズのプラスチック製、二重絶縁の双生児です。
品番の構成
- 完全なユニット = ボディ + ヘッド。 XB4BA31はボディとその接点(ZB4BZ101)にヘッド(ZB4BA3)を加えたものです。また、固定カラーZB4BZ009、接点ブロックZBE101、ヘッドの3つの部品を個別に購入することもできます。
- 1文字で取り付け方法が変わる: ZB4B…は標準の22 mmヘッド、ZB4F…は30 mm埋め込み型(ZB4BA3 → ZB4FA3)。
- 黒色金属ベゼル: ヘッドに7を追加(ZB4BD2 → ZB4BD27)。
- プッシュイン端子: 末尾が5の完全ユニットはコンパクトなプッシュイン接点ブロックを使用(XB4BD335の代わりにXB4BD33)。
- セレクターヘッド: ZB4BD2は2位置固定、ZB4BD4は2位置で右から左にスプリングリターン、ZB4BD3は3位置固定、ZB4BD5は中央にスプリングリターン、ZB4BD7 / ZB4BD8は左 / 右から中央にスプリングリターン。JはDの代わりに長いハンドル(ZB4BJ3)、Gはキースイッチ、Kはイルミネーション付きセレクター。
- パイロットランプ: BVの後の文字は電圧(B = 24 V、G = 110–120 V、M = 230–240 V)、最後の数字は色を示します。
ボディと接点ブロック
| 接点付きボディ | 接点 | 接点ブロック | タイプ | |
|---|---|---|---|---|
| ZB4BZ101 | 1 NO | ZBE101 | NO | |
| ZB4BZ102 | 1 NC | ZBE102 | NC | |
| ZB4BZ103 | 2 NO | ZBE203 / ZBE204 / ZBE205 | ダブル: 2 NO / 2 NC / NO + NC | |
| ZB4BZ104 | 2 NC | ZBE1016 / ZBE1026 | 低電力(電子入力) | |
| ZB4BZ105 | 1 NO + 1 NC | ZBE201 / ZBE202 | 早期接続NO / 遅延切断NC | |
| ZB4BZ141 | 1 NO + 2 NC | ZBE501–ZBE505 | 高電力スイッチング |
接点ブロックは最大3列にクリップで取り付けられます。イルミネーション付きユニットはユニバーサルLEDライトブロック(ZBVB1 24 V、ZBVG1 110–120 V、ZBVM1 230–240 V、「UN」マーク付き)を使用します。1つのブロックで全てのレンズ色に対応します。
全シリーズの定格(Schneiderカタログ、2026年1月)
- IP66、IP67、IP69、IP69KおよびUL Type 4X;衝撃IK06(プラスチックXB5:IK03)
- −40から+70 °C;プッシュボタンで最大1000万回操作
- 22 mm穴、回転防止ノッチ有無;パネル厚1–6 mm
- IEC、UL、CSA、CCC、EAC、JIS;船舶認証(BV、Lloyd's Register、DNV)
個別のデータシートはこれらのシリーズ数値と異なる場合があります。例えば、XB4BD33セレクターは100万回サイクルの定格です。
取り付け
ヘッドはパネル穴に固定されるため、1人で取り付け可能です。ボディは後ろからクリップで取り付けられ、ネジで固定されます(0.8 N·m、最大1.2 N·m);プラスチックXB5とは異なり、ナットはありません。XB5のナットは工具ZB5AZ905で締めます。端子は0.34–1.5 mm²(AWG 22–16)、1端子に2本の線、0.8–1.2 N·mで接続します。Schneiderによると、緩み防止端子ネジは定期的な再締めは不要です。ボディを取り外すには、平らなドライバーを黒いタブに入れて引っ張ります。
便利なアクセサリ
- レジェンドホルダー ZBZ32(30 × 40 mm)に印刷されたレジェンド、例:ZBY2385 "AUTO-O-HAND"、ZBY2186 "I-O-II"、ZBY2178 "O-I"、ZBY2303 "START"、ZBY2304 "STOP";ZBY2101は彫刻用のブランク
- ガード: ZBZ2102プラスチックガード(セレクターとキースイッチ用);ZBZ1605金属ガード(非常停止スイッチ用、ロック可能)
- ブランキングプラグ ZB4SZ3(カラーZB4BZ009付き)未使用の穴用;液体スプレー用ワッシャー ZB4BZ007(ヘッド下)
- 30 mm埋め込みキット ZB4BZ021(プッシュボタン、パイロットランプ)およびZB4BZ022(セレクター、イルミネーション付きプッシュボタン)
金属XB4またはプラスチックXB5?
同じ仕事をし、同じ22 mm穴に適合します。衝撃、振動、熱(例:溶接スパッタ)に対しては金属を、二重絶縁と低価格を求める場合はプラスチックを選択します。両方とも高IPバージョンがあります。Schneider中国では、XB4は輸入品のみで、XB5は現地生産もされています。Schneiderのより安価なシリーズはEasy Harmony XA2(金属)およびXB2 / XB7です。
購入時の注意点
- 類似品: 多くのマーケットプレイスリストでは、XB4コードが無銘のコピー品に使用され、工場価格は1個約1ドルです。ある販売者のビデオでは、「高品質の偽物」と本物の接点ブロックを比較し、コピー品のNO接点が導通テストで切断される様子を示しています。正規販売店から購入し、Schneiderのマーキングを確認してください。
- IP66 vs IP67/IP69K: カタログのセクションヘッダーでは、製品全体のグループに対してIP66を引用していますが、個別部品のデータシートではIP67、IP69、IP69Kがリストされています。店舗はどちらかの数値をコピーします。
- 廃盤および欠番: 一部の完全ユニットは製造中止されています(例:XB4BD73、2022年1月)。ヘッドは通常まだ販売されているため、ヘッド + ボディからスイッチを組み立てることができます。
- 使用中の問題: 私たちが読めるフォーラムやレビューでは、このシリーズに繰り返し発生する故障パターンは見つかりませんでした。見つかった苦情は、偽物と誤ったリストに関するものでした。
出典
- Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
- Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
- XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
- FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
- Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
- Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
- Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
- How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026
仕様一覧
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (head-only)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
Not inherent to head — set by separate ZBV LED module (24/120/230V options)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Pn note
|
ZB4BW333 = green flush illuminated HEAD (se.com). Voltage-independent — the -230/230V is bogus; LED voltage is set by the separate ZBV module (ZBV-M3=230V, ZBV-G3=120V, ZBV-B3=24V green). Head-only (LED+contact separate).
|
|
Pn status
|
voltage/suffix-corrected + head-only
|
取付クイックリファレンス
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
外形寸法
配線図
トラブルシューティング
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
購入先
価格帯
$27.62 — $28.98
across 2 sellers in US dollars
主要仕様
- Certifications
- UL, CSA, CE
- Color
- Green
- Contact Configuration
- None integral (head-only)
- Cutout Diameter
- 22mm
- Device type
- ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333
ユーザーの声
“For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.”