Schneider Electric · Harmony XB4 Baureihe

ZB4-BW333-230

Aktiv
UL CSA CE

Schneider ZB4BW333 Green Flush Illuminated Pushbutton Head (Harmony XB4, head-only)

Artikelnummer: ZB4 - B - W - 3 - 33
Schneider Electric Harmony XB4 Baureihe Introduced circa 2003

Schneider XB4 illuminated green for 230V circuits.

Typische Anwendungen

For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.

Forschungsnotizen

1. Overview

The Schneider Electric ZB4BW333 is a 22 mm metal green flush illuminated pushbutton head for the Harmony XB4 / ZB4 system — a spring-return (momentary), flush, illuminated operator head. As a ZB4 part it is the head only: to build a working illuminated button you add a separate ZBV LED module (voltage-specific) and a ZB4 contact block, mounted on the body (the complete factory unit is XB4-BW333 + LED). (Data-quality note: this was cataloged as "230 V AC" (PN "ZB4-BW333-230") — but the head is voltage-independent; the LED voltage is set by the separate ZBV module you fit (e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V, ZBV-B3/B1 = 24 V). The "-230" suffix is bogus and the 230 V is not inherent to ZB4BW333.)

2. User Sentiment

Harmony XB4 metal illuminated heads are standard, robust industrial operators. The key practical point (and this entry's error) is the modular design: the ZB4-BW head, the ZBV LED module (choose the voltage/color), and the contact block are ordered separately — the head alone doesn't light or switch.

3. Real-World Applications

An illuminated green (start/run/on) flush pushbutton on machine and control panels — the integral LED (once a ZBV module is fitted at the correct voltage) shows energized/active state; a contact block drives a contactor/PLC input.

4. Technical Specifications

  • Type: Harmony XB4/ZB4 metal illuminated pushbutton head (head-only), 22 mm
  • Actuator: flush, momentary (spring-return); green; illuminated (LED module separate)
  • LED voltage: not inherent to the head — set by the separate ZBV LED module (24 / 120 / 230 V options)
  • Contacts: none integral — add a ZB4 contact block
  • Cutout: 22 mm; metal (chrome) bezel; IP66
  • Approvals: UL, CSA, CE
  • Complete unit: XB4-BW333 (+ LED module + contacts)

5. Ordering & Compatibility

Order the ZB4BW333 head plus a ZBV LED module (pick the voltage — e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V green, ZBV-B3 = 24 V green) and a ZB4 contact block — or the complete XB4-BW333. Fits 22 mm cutouts, XB4/XB5 system. BW = illuminated flush; color digit selects green.

6. Known Issues / DQ

  • DQ: the head is voltage-independent — "230 V" is not inherent to ZB4BW333 (the "-230" suffix is bogus); voltage is set by the separate ZBV LED module. Corrected here. It's also a head (no integral LED/contact).
  • Practical care: order head + correct-voltage ZBV LED module + contact block; confirm the 22 mm cutout.

Quelle
  1. ZB4BW333 — Head for illuminated push button, Harmony XB4, metal, green flush — se.com
  2. Schneider ZB4BW333 green flush illuminated pushbutton head (LED module separate) — mouser.com
Über die Harmony XB4-Baureihe

Gilt für jeden Teil der Produktpalette, nicht nur für den ZB4-BW333-230.

Was die Serie umfasst

Harmony XB4 ist die Serie von metallenen 22-mm-Drucktastern, Wahlschaltern, Schlüsselschaltern, Not-Aus-Schaltern und Signallampen von Schneider Electric mit einem verchromten (oder schwarzen) Metall-Frontring. Ältere Teile und viele Geschäfte verwenden noch den Namen Telemecanique. Die gleichen Funktionen gibt es als 30-mm-Einbau-Versionen (XB4F / ZB4F), und Harmony XB5 ist die doppelt isolierte Kunststoff-Variante der Serie.

Wie die Teilnummern zusammengesetzt sind

  • Komplettes Gerät = Körper + Kopf. XB4BA31 ist der Körper mit seinem Kontakt (ZB4BZ101) plus dem Kopf (ZB4BA3). Sie können auch die drei Einzelteile kaufen: Befestigungsflansch ZB4BZ009, Kontaktblock ZBE101 und den Kopf.
  • Ein Buchstabe ändert die Montage: ZB4B… ist der Standard-22-mm-Kopf, ZB4F… die 30-mm-Einbauversion (ZB4BA3 → ZB4FA3).
  • Schwarzer Metall-Frontring: fügen Sie eine 7 zum Kopf hinzu (ZB4BD2 → ZB4BD27).
  • Push-in-Klemmen: Komplettgeräte, die auf 5 enden, verwenden kompakte Push-in-Kontaktblöcke (XB4BD335 statt XB4BD33).
  • Wahlschalterköpfe: ZB4BD2 zwei Positionen bleiben stehen; ZB4BD4 zwei Positionen, Rückstellung von rechts nach links; ZB4BD3 drei Positionen bleiben stehen; ZB4BD5 Rückstellung in die Mitte; ZB4BD7 / ZB4BD8 Rückstellung von links / rechts in die Mitte. J statt D ist der lange Griff (ZB4BJ3), G ein Schlüsselschalter, K ein beleuchteter Wahlschalter.
  • Signallampen: Der Buchstabe nach BV ist die Spannung (B = 24 V, G = 110–120 V, M = 230–240 V); die letzte Ziffer ist die Farbe.

Körper und Kontaktblöcke

Körper mit KontaktenKontakteKontaktblockTyp
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205doppelt: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026Niedrigleistung (elektronische Eingänge)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202Frühschließer NO / Spätöffner NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505Hochleistungsschaltung

Kontaktblöcke werden in bis zu drei Reihen aufgesteckt. Beleuchtete Einheiten benötigen einen Universal-LED-Lichtblock (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, gekennzeichnet mit "UN"); ein Block funktioniert mit jeder Linsenfarbe.

Bewertungen für die gesamte Serie (Schneider-Katalog, Januar 2026)

  • IP66, IP67, IP69, IP69K und UL Typ 4X; Stoßfestigkeit IK06 (der Kunststoff XB5: IK03)
  • −40 bis +70 °C; bis zu 10 Millionen Betätigungen für Drucktaster
  • 22 mm Loch, mit oder ohne Drehsicherung; Panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine Zulassungen (BV, Lloyd's Register, DNV)

Einzelne Datenblätter können von diesen Serienwerten abweichen. Der Wahlschalter XB4BD33 ist beispielsweise für 1 Million Zyklen ausgelegt.

Installation

Der Kopf hält sich selbst im Panelloch, sodass eine Person ihn einbauen kann. Der Körper wird von hinten aufgesteckt und mit seiner Schraube befestigt (0,8 N·m, max. 1,2 N·m); es gibt keine Mutter, anders als beim Kunststoff XB5, dessen Mutter mit dem Werkzeug ZB5AZ905 angezogen wird. Klemmen nehmen 0,34–1,5 mm² (AWG 22–16), zwei Drähte pro Klemme, bei 0,8–1,2 N·m. Schneider sagt, dass die selbsthemmenden Klemmschrauben kein periodisches Nachziehen benötigen. Um einen Körper zu entfernen, führen Sie einen Flachschraubendreher in den schwarzen Tab und ziehen ihn zurück.

Nützliches Zubehör

  • Schildhalter ZBZ32 (30 × 40 mm) mit bedruckten Schildern wie ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 ist leer für Gravur
  • Schutzhauben: ZBZ2102 Kunststoffschutz für Wahlschalter und Schlüsselschalter; ZBZ1605 Metallschutz für Not-Aus-Schalter (mit Vorhängeschloss)
  • Blindstopfen ZB4SZ3 (mit Flansch ZB4BZ009) für ein unbenutztes Loch; Flüssigkeitsspritzring ZB4BZ007 unter dem Kopf
  • 30-mm-Einbau-Kits ZB4BZ021 (Drucktaster, Signallampen) und ZB4BZ022 (Wahlschalter, beleuchtete Drucktaster)

Metall XB4 oder Kunststoff XB5?

Sie erledigen die gleichen Aufgaben und passen in das gleiche 22-mm-Loch. Wählen Sie Metall für Stoß, Vibration und Hitze (z.B. Schweißspritzer), Kunststoff für doppelte Isolierung und einen niedrigeren Preis; beide gibt es in hohen IP-Versionen. Schneider China stellt fest, dass dort XB4 nur importiert wird, während XB5 auch lokal hergestellt wird. Die günstigeren Serien von Schneider sind Easy Harmony XA2 (Metall) und XB2 / XB7.

Kaufhinweise

  • Nachahmer: viele Marktplatzangebote verwenden XB4-Codes für unbrandete Kopien, zu Fabrikpreisen von etwa $1 pro Stück. Ein Verkäufervideo, das eine "hochwertige Fälschung" mit einem echten Kontaktblock vergleicht, zeigt, dass der NO-Kontakt der Kopie bei einem Durchgangstest aussetzt. Kaufen Sie bei einem autorisierten Händler und überprüfen Sie die Schneider-Kennzeichnung.
  • IP66 vs IP67/IP69K: Katalogabschnittsüberschriften geben IP66 für ganze Produktgruppen an, während die Datenblätter einzelner Teile IP67, IP69 und IP69K auflisten. Geschäfte kopieren entweder die eine oder die andere Zahl.
  • Eingestellte und fehlende Codes: einige Komplettgeräte werden nicht mehr hergestellt, z.B. XB4BD73 (Januar 2022). Die Köpfe werden in der Regel noch verkauft, sodass der Schalter aus Kopf + Körper gebaut werden kann.
  • Probleme im Einsatz: wir fanden kein wiederkehrendes Fehlermuster für die Serie in den Foren und Bewertungen, die wir lesen konnten; die Beschwerden, die wir fanden, betrafen Fälschungen und falsche Listings.
Quelle
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Spezifikationen

Certifications
UL, CSA, CE
Color
Green
Contact Configuration
None integral (head-only)
Cutout Diameter
22mm
Device type
ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333
Illumination
Illuminated
IP Rating
IP66
LED Voltage
Not inherent to head — set by separate ZBV LED module (24/120/230V options)
Material
Metal
Pn note
ZB4BW333 = green flush illuminated HEAD (se.com). Voltage-independent — the -230/230V is bogus; LED voltage is set by the separate ZBV module (ZBV-M3=230V, ZBV-G3=120V, ZBV-B3=24V green). Head-only (LED+contact separate).
Pn status
voltage/suffix-corrected + head-only

Installationskurzanleitung

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Abmessungen

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Schaltplan

L T 11 12 NO (open) press ↓

Fehlerbehebung

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Bezugsquellen

Preisbereich

$27.62 — $28.98

across 2 sellers in US dollars

Kurzspezifikationen

Certifications
UL, CSA, CE
Color
Green
Contact Configuration
None integral (head-only)
Cutout Diameter
22mm
Device type
ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333

Das sagen Anwender

+

“For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.”

Reddit r/PLC 17 Bewertungen Thread anzeigen →