ZB4-BW333-230
AktiivneSchneider ZB4BW333 Green Flush Illuminated Pushbutton Head (Harmony XB4, head-only)
Schneider XB4 illuminated green for 230V circuits.
Tüüpilised rakendused
For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.
Uurimismärkmed
1. Overview
The Schneider Electric ZB4BW333 is a 22 mm metal green flush illuminated pushbutton head for the Harmony XB4 / ZB4 system — a spring-return (momentary), flush, illuminated operator head. As a ZB4 part it is the head only: to build a working illuminated button you add a separate ZBV LED module (voltage-specific) and a ZB4 contact block, mounted on the body (the complete factory unit is XB4-BW333 + LED). (Data-quality note: this was cataloged as "230 V AC" (PN "ZB4-BW333-230") — but the head is voltage-independent; the LED voltage is set by the separate ZBV module you fit (e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V, ZBV-B3/B1 = 24 V). The "-230" suffix is bogus and the 230 V is not inherent to ZB4BW333.)
2. User Sentiment
Harmony XB4 metal illuminated heads are standard, robust industrial operators. The key practical point (and this entry's error) is the modular design: the ZB4-BW head, the ZBV LED module (choose the voltage/color), and the contact block are ordered separately — the head alone doesn't light or switch.
3. Real-World Applications
An illuminated green (start/run/on) flush pushbutton on machine and control panels — the integral LED (once a ZBV module is fitted at the correct voltage) shows energized/active state; a contact block drives a contactor/PLC input.
4. Technical Specifications
- Type: Harmony XB4/ZB4 metal illuminated pushbutton head (head-only), 22 mm
- Actuator: flush, momentary (spring-return); green; illuminated (LED module separate)
- LED voltage: not inherent to the head — set by the separate ZBV LED module (24 / 120 / 230 V options)
- Contacts: none integral — add a ZB4 contact block
- Cutout: 22 mm; metal (chrome) bezel; IP66
- Approvals: UL, CSA, CE
- Complete unit: XB4-BW333 (+ LED module + contacts)
5. Ordering & Compatibility
Order the ZB4BW333 head plus a ZBV LED module (pick the voltage — e.g. ZBV-M3 = 230 V green, ZBV-G3 = 120 V green, ZBV-B3 = 24 V green) and a ZB4 contact block — or the complete XB4-BW333. Fits 22 mm cutouts, XB4/XB5 system. BW = illuminated flush; color digit selects green.
6. Known Issues / DQ
- DQ: the head is voltage-independent — "230 V" is not inherent to ZB4BW333 (the "-230" suffix is bogus); voltage is set by the separate ZBV LED module. Corrected here. It's also a head (no integral LED/contact).
- Practical care: order head + correct-voltage ZBV LED module + contact block; confirm the 22 mm cutout.
Harmony XB4 seeria kohta
Kehtib kogu tootevaldkonna kohta, mitte ainult ZB4-BW333-230 osa puhul.
Mis see valik on
Harmony XB4 on Schneider Electrici metallist 22 mm nuppude, valikulülitite, võtmelülitite, hädaolukorra peatamise ja piloottulede seeria, millel on kroomitud (või must) metallist esirõngas. Vanemad osad ja paljud poed kasutavad endiselt Telemecanique nime. Samad funktsioonid on saadaval ka 30 mm tasandatud versioonidena (XB4F / ZB4F), ja Harmony XB5 on selle seeria plastikust, kahekordselt isoleeritud kaksik.
Kuidas osanumbrid sobivad kokku
- Täielik ühik = korpus + pea. XB4BA31 on korpus koos kontaktiga (ZB4BZ101) pluss pea (ZB4BA3). Saate osta ka kolm lahtist osa: kinnitusrõngas ZB4BZ009, kontaktplokk ZBE101 ja pea.
- Üks täht muudab kinnitust: ZB4B… on standardne 22 mm pea, ZB4F… 30 mm tasandatud versioon (ZB4BA3 → ZB4FA3).
- Must metallist esirõngas: lisage peale 7 (ZB4BD2 → ZB4BD27).
- Suruterminalid: täielikud ühikud, mis lõpevad numbriga 5, kasutavad kompaktset suruterminalidega kontaktplokki (XB4BD335 asemel XB4BD33).
- Valikulülitite pead: ZB4BD2 kaks positsiooni jäävad paigale; ZB4BD4 kaks positsiooni, vedru tagasipööre paremalt vasakule; ZB4BD3 kolm positsiooni jäävad paigale; ZB4BD5 vedru tagasipööre keskele; ZB4BD7 / ZB4BD8 vedru tagasipööre vasakult / paremalt keskele. J asemel D on pika käepidega (ZB4BJ3), G on võtmelüliti, K on valgustatud valikulüliti.
- Piloottuled: täht BV järel on pinge (B = 24 V, G = 110–120 V, M = 230–240 V); viimane number on värv.
Korpus ja kontaktplokid
| Korpus kontaktidega | Kontaktid | Kontaktplokk | Tüüp | |
|---|---|---|---|---|
| ZB4BZ101 | 1 NO | ZBE101 | NO | |
| ZB4BZ102 | 1 NC | ZBE102 | NC | |
| ZB4BZ103 | 2 NO | ZBE203 / ZBE204 / ZBE205 | topelt: 2 NO / 2 NC / NO + NC | |
| ZB4BZ104 | 2 NC | ZBE1016 / ZBE1026 | madalvõimsus (elektroonilised sisendid) | |
| ZB4BZ105 | 1 NO + 1 NC | ZBE201 / ZBE202 | varajane sulgemine NO / hiline avamine NC | |
| ZB4BZ141 | 1 NO + 2 NC | ZBE501–ZBE505 | kõrge võimsusega lülitamine |
Kontaktplokid kinnituvad kuni kolme reana. Valgustatud ühikud kasutavad universaalset LED valgusplokki (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, märgistusega "UN"); üks plokk sobib iga läätsvärvi jaoks.
Kogu seeria hinnangud (Schneideri kataloog, jaanuar 2026)
- IP66, IP67, IP69, IP69K ja UL tüüp 4X; löögikindlus IK06 (plastik XB5: IK03)
- −40 kuni +70 °C; kuni 10 miljonit toimingut nuppude jaoks
- 22 mm auk, koos või ilma pöörlemisvastase sälguta; paneel 1–6 mm
- IEC, UL, CSA, CCC, EAC, JIS; merevahendite heakskiidud (BV, Lloyd's Register, DNV)
Individuaalsed andmelehed võivad erineda nende seeria numbritest. Näiteks on XB4BD33 valikulüliti hinnanguliselt 1 miljon tsüklit.
Paigaldamine
Pea hoiab ise paneeli augus, nii et üks inimene saab selle paigaldada. Korpus kinnitub tagantpoolt ja kinnitatakse kruviga (0,8 N·m, maksimaalselt 1,2 N·m); pole mutrit, erinevalt plastikust XB5, mille mutrit pingutatakse tööriistaga ZB5AZ905. Terminalid võtavad 0,34–1,5 mm² (AWG 22–16), kaks juhtmest terminali kohta, 0,8–1,2 N·m juures. Schneider ütleb, et lahtivõtmisevastased terminalkruvid ei vaja perioodilist uuesti pingutamist. Korpus eemaldamiseks pange lame kruvikeeraja musta klappi ja tõmmake see tagasi.
Kasulikud lisavarustused
- Legendihoidja ZBZ32 (30 × 40 mm) trükitud legendidega nagu ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 on tühi graveerimiseks
- Kaitsmed: ZBZ2102 plastikust kaitsmed valikulülitite ja võtmelülitite jaoks; ZBZ1605 metallist kaitsmed hädaolukorra peatamise jaoks (lukustatav)
- Tühjenduspistik ZB4SZ3 (koos rõngaga ZB4BZ009) kasutamata augu jaoks; vedelikprisimispesu ZB4BZ007 pea all
- 30 mm tasandatud komplektid ZB4BZ021 (nupud, piloottuled) ja ZB4BZ022 (valikulülitid, valgustatud nupud)
Metallist XB4 või plastikust XB5?
Nad teevad sama töö ja sobivad samasse 22 mm auku. Valige metall löögi, vibratsiooni ja kuumuse (nt keevitusprisked) jaoks, plastik kahekordse isoleerimise ja madalama hinna jaoks; mõlemad on saadaval kõrge IP versioonidena. Schneider Hiina märgib, et seal on XB4 ainult import, samas kui XB5 on ka kohapeal toodetud. Schneideri odavamad seeriad on Easy Harmony XA2 (metall) ja XB2 / XB7.
Ostmisel märkused
- Sarnased: paljud turulistingud kasutavad XB4 koode brändimata koopiate jaoks, tehasehindadega umbes $1 tükk. Müüja video, mis võrdleb "kõrge kvaliteediga võltsingut" originaalse kontaktplokiga, näitab koopia NO kontakti katkemist järjepidevuse testil. Ostke volitatud jaemüüjalt ja kontrollige Schneideri märgistust.
- IP66 vs IP67/IP69K: kataloogi sektsioonipealkirjad mainivad IP66 tervele rühmale tooteid, samas kui individuaalsete osade andmelehed loetlevad IP67, IP69 ja IP69K. Poed kopeerivad mõlemat numbrit.
- Kasutusest eemaldatud ja puuduvad koodid: mõned täielikud ühikud ei ole enam toodetud, nt XB4BD73 (jaanuar 2022). Pead on tavaliselt endiselt müügil, nii et lüliti saab koostada peast + korpusest.
- Kasutusprobleemid: me ei leidnud foorumitest ja arvustustest, mida saime lugeda, korduvat rikke mustrit selle seeria kohta; leitud kaebused puudutasid võltsinguid ja valesid listinguid.
Allikas
- Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
- Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
- XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
- FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
- Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
- Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
- Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
- How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026
Spetsifikatsioonid
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (head-only)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
Not inherent to head — set by separate ZBV LED module (24/120/230V options)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Pn note
|
ZB4BW333 = green flush illuminated HEAD (se.com). Voltage-independent — the -230/230V is bogus; LED voltage is set by the separate ZBV module (ZBV-M3=230V, ZBV-G3=120V, ZBV-B3=24V green). Head-only (LED+contact separate).
|
|
Pn status
|
voltage/suffix-corrected + head-only
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Mõõtmed
Ühenduseskeem
Veaotsing
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kust osta
Hinnavahemik
$27.62 — $28.98
across 2 sellers in US dollars
Kiirspetsifikatsioonid
- Certifications
- UL, CSA, CE
- Color
- Green
- Contact Configuration
- None integral (head-only)
- Cutout Diameter
- 22mm
- Device type
- ZB4-BW illuminated pushbutton HEAD (green flush); LED module + contact separate; complete = XB4-BW333
Mida kasutajad ütlevad
“For European panels with direct mains-voltage indicators. Same button, different LED voltage module. Verify voltage before installing.”