ZB4-BA4
ActivoHarmony XB4 Red Flush Push Button Head
Red flush push button head for Schneider Harmony XB4 series. 22mm cutout, IP66 rated. Requires separate contact block (ZB4-BZ102 for 1NC).
Aplicaciones comunes
Standard stop button across industrial control panels. Found on commercial kitchen equipment alongside the green ZB4-BA3 (start), CNC machine tool auxiliary stops, and conveyor emergency halt stations. Red color follows IEC 60204-1 meaning stop or off. The 1NC contact configuration breaks the circuit when pressed — wire it in series with the motor contactor coil so pressing the button kills power to the motor.
Comúnmente encontrado en
Advertencia de falsificación Medium riesgo
Same counterfeit risk as ZB4-BA3. Verify via Schneider QR code authentication.
Compatibilidad
Compatible with all XB4 contact blocks. Fits XB2 legacy mounting holes.
Especificaciones
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.
|
1NC (with ZB4-BZ102)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
10,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
Las especificaciones con este icono están vinculadas a la página fuente original del fabricante
También necesitará
Este es un componente modular. Para un ensamblaje completo, también puede necesitar:
Alternativas compatibles
Estos productos son referencias cruzadas funcionalmente equivalentes de otros fabricantes.
Referencia rápida de instalación
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiones
Diagrama de cableado
Solución de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dónde comprar
Rango de precios
$1.85 — $9.91
en 4 distribuidores
Especificaciones rápidas
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Red
- Contact Configuration
- 1NC (with ZB4-BZ102)
Lo que dicen los usuarios
“Solid button for panel builds. Schneider Electric Harmony XB4 series is well-proven in the field. Standard 22mm mounting means easy replacement if needed.”
Más información
Grados de protección IP explicados
Qué significan IP65, IP66, IP67, IP69K para su aplicación
Guía 22mm vs. 30mm
¿Qué tamaño de corte de panel necesita?
Bloques de contacto: NO vs. NC
Cómo elegir y cablear bloques de contacto
Herramienta buscador de botones
Encuentre el botón correcto por tipo, tamaño y color
Fuentes de datos
Especificaciones y datos de producto obtenidos de las siguientes referencias.
