HW1B-M110G
在产HW Green Flush Push Button (1NO)
Green flush momentary push button, IDEC HW series. 22mm cutout, IP65, with 1NO contact.
常见应用
IDEC HW series push button popular as a cost-effective alternative to Schneider and Eaton. Found on budget-conscious machine builds, retrofit projects, and OEM equipment where the control panel cost matters. The HW series offers the same 22mm standard mounting and IP65 front protection at roughly 30-40% lower cost than the premium European brands. Common in light manufacturing, material handling, and commercial building controls in North America and Asia.
规格参数
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Non-illuminated
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
65°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
HW
|
带有此图标的规格参数链接到制造商的原始来源页面
兼容替代品
这些产品是来自其他制造商的功能等效互换产品。
Omron
A22-FG-10M
A22 Green Flush Push Button (1NO)
Siemens
3SU1130-0AB40-1BA0
SIRIUS ACT Green Flush Push Button (1NO)
Eaton
M22-DP-G-K10
M22 Green Flush Push Button with 1NO Contact Block
ABB
MP3-10G
Modular Extended Green Push Button (1NO)
Siemens
3SU1100-0AB40-1BA0
SIRIUS ACT Green Flush Push Button Plastic (1NO)
Schneider Electric
ZB4-BA3
Harmony XB4 Green Flush Push Button Head
Eaton
M22-D-G
M22 Green Flush Push Button
ABB
MP1-10G
Modular Green Flush Push Button (1NO)
安装快速参考
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
接线图
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
购买渠道
价格范围
$1.74 — $5.64
来自 3 家经销商
快速规格
- Actuator Function
- Momentary
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Green
用户评价
“Been using IDEC HW buttons on smaller machines for 2 years now with zero failures. At roughly 40% less than Schneider Harmony they're hard to beat for OEM builds where the customer won't pay for premium.”
“IDEC HW series is surprisingly good for the price. Same 22mm standard, IP65 front, and about 30% cheaper than Schneider or Eaton. We use them on all our smaller builds where the client is cost-conscious.”
了解更多
数据来源
规格参数和产品数据来源于以下参考资料。
HW1B-M110G IDEC Product Page
https://us.idec.com/idec-us/en/USD/Pushbuttons/Flush-Round/HW-Series/p/HW1B-M110G
访问日期 March 28, 2026