MP1-10G
ActiveModular Green Flush Push Button (1NO)
Green flush momentary push button, ABB Modular series. 22mm cutout, IP65, with integrated 1NO contact.
Common Applications
ABB modular push button used across European and Asian industrial installations. The MP series is ABBs answer to the Schneider Harmony and Eaton M22 — same 22mm standard, fully cross-compatible for panel cutouts. Popular in power generation control rooms, water treatment facilities, and mining operations where ABB has a strong presence in the drives and motor control market. The plastic body keeps costs down for large panel builds with dozens of buttons.
Research Notes
1. Overview
The ABB MP1-10G is a non-illuminated, green, flush-mount momentary push button operator belonging to ABB's MP1 Modular Plastic range. It carries the ABB order reference 1SFA611100R1002. The unit is a head-only operator — no contact block is included — making it a component of a modular assembly system where operators, contact blocks, and holders are combined to build a complete pilot device. The snap-on modular architecture is marketed by ABB as saving up to 30% installation time compared to traditional screwed designs. Manufactured in Sweden, the MP1-10G is sold globally through authorized distributors at a typical street price of USD 7–11 per unit.
2. User Sentiment
No user reviews were found in accessible web sources at time of research. Distributor listings describe the product as "100% Original" with 12-month warranty through authorized channels, and ABB backs the range with a 24/7 technical support commitment. The modular snap-on system is consistently highlighted as a key usability advantage. The product is widely stocked across major industrial distributors (RS Components, Galco, Advantage Electric, North Coast, Essential Parts, Gescan, Anixter), indicating strong market acceptance. No negative field reports or known quality complaints surfaced.
3. Real-World Applications
The MP1-10G is used in industrial control panels as a start, reset, or function-selection push button wherever green (go/run/safe) color coding is required. Typical contexts include:
- Machine tool start buttons
- Motor starter control panels (paired with MCB-10 NO or MCB-01 NC contact blocks)
- Conveyor/automation line operators
- HVAC and building-automation control desks
- Any NEMA 12/4X or IP66-rated enclosure requiring a momentary green actuator
The flush-head profile reduces accidental activation risk, making it preferred in environments where inadvertent button presses are a concern.
4. Technical Specifications
- Type: Modular momentary push button operator (head only, no contact block)
- Part Number: MP1-10G / 1SFA611100R1002
- Mounting Cutout: 22 mm
- Actuator Style: Flush button
- Color: Green
- Illumination: Non-illuminated
- Bezel/Housing Material: Black plastic
- Lockable: No
- Operating Temperature: -25 to +70°C
- Enclosure Rating: NEMA 1 / 3R / 4 / 4X / 12 / 13; IP66 (front face)
- Mechanical Durability: Up to 10 million operations (2 million per some sources — operator head only)
- AC-15 Rating: 6 A at 230 V (when paired with compatible contact block)
- Weight (gross): ~16 g
- Package Dimensions: 150 × 110 × 29 mm
- Country of Origin: Sweden
- Certifications: CE, RoHS, UL (File No. E76003), CSA (File No. LR19700)
- HSN Code (India): 8536501999
- UNSPSC: 39122216
- UPC: 07320500260982
5. Ordering & Compatibility
The MP1-10G is a head-only component. To create a functional push-button station, one or more contact block holders and contact blocks must be added:
- MCBH-00 — Contact block holder (mounts to back of head)
- MCB-10 — 1NO contact block (snap-on, pairs with MCBH-00)
- MCB-01 — 1NC contact block
- MP1-11G (1SFA611100R1102) — Illuminated green variant of the same head
Compatible with ABB's full MP1 / MC1 modular pilot device ecosystem. The illuminated variant (MP1-11G) accepts an internal lamp module. For emergency-stop needs within the same product family, MPET3-10B is the compatible E-stop operator.
Typical pricing: USD 7–11 (US distributors); approx. INR 42–50 (India ABB eMart).
6. Known Issues
No significant issues reported. The head-only configuration (no contact block included) is occasionally a source of confusion for buyers who expect a ready-to-wire unit — distributors' listings prominently note "No contact block" to address this. Snap-on contact blocks (MCB-10/MCB-01) are sold separately.
10 sources
- MP1-10G | ABB — ABB Official Product Page
- ABB MP1-10G Pushbutton — ABB Official Product Page (alternate)
- MP1-10G - ABB - Non-Illuminated — House of Electrical
- ABB MP1-10G Pushbutton Operator — Standard Electric Supply
- MP1-10G ABB Control - Industrial Automation Components — Advantage Electric Supply
- 1SFA611100R1002 - MP1-10G Pushbutton | ABB — Electrihub
- ABB MP1-10G Pushbutton | ABB eMart India — ABB India eMart
- ABB MP1-10G Modular Series Green Push Button Head Momentary 22mm Cutout — RS Components US
- ABB MP1-10G 22mm Momentary Modular Non-Illuminated Pushbutton, Green — Gescan
- MP1-10G - ABB - Switch Operator | Galco Industrial Electronics — Galco Industrial Electronics
Commonly Found On
Specifications
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
Specs with this icon are linked to the manufacturer's original source page
You'll Also Need
This is a modular component. For a complete assembly, you may also need:
Compatible Alternatives
These products are functionally equivalent cross-references from other manufacturers.
ABB
MP3-10G
Modular Extended Green Push Button (1NO)
Eaton
M22-D-G
M22 Green Flush Push Button
IDEC
HW1B-M110G
HW Green Flush Push Button (1NO)
Siemens
3SU1130-0AB40-1BA0
SIRIUS ACT Green Flush Push Button (1NO)
Omron
A22-FG-10M
A22 Green Flush Push Button (1NO)
Eaton
M22-DP-G-K10
M22 Green Flush Push Button with 1NO Contact Block
Siemens
3SU1100-0AB40-1BA0
SIRIUS ACT Green Flush Push Button Plastic (1NO)
Schneider Electric
ZB4-BA3
Harmony XB4 Green Flush Push Button Head
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Videos
Installing and servicing the range
How this kind of part works
Where to Buy
Price range
$1.73 — $6.2
across 3 sellers in US dollars
Quick Specs
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Green
- Contact Configuration
- 1NO
What People Are Saying
“We're redoing all our control panels and need to pick one brand. The Eaton M22 IP67 rating is slightly better than ABB's IP65, but ABB's modular contact blocks snap on faster during assembly. Price is nearly identical from our distributor.”
“Used literally truckloads of ABB 30mm operators, and then a sprinkling of Schneider both 30 and 22mm. Any are not monumentally different from the next.”
Learn More
Data Sources
Specifications and product data sourced from the following references.
ABB MP1-10G Product Page
https://new.abb.com/products/1SFA611100R1002/mp1-10g
Accessed March 28, 2026