ABB · Modular (MP) Series

MP3-10G

Name: ABB MP3-10G
Brand: ABB
SKU: MP3-10G

Active

UL UL Listed — meets US safety standards. Required for NEC-inspected installations. CSA CSA Certified — meets Canadian safety standards. Required for installations in Canada. CE CE Marked — complies with EU directives (Low Voltage, Machinery, EMC).

Modular Extended Green Push Button (1NO)

Part number: MP Modular Push Button series - 3 22mm extended - 10G 1NO, Green

ABB Modular (MP) Series Introduced circa 2005

ABB MP3-10G — Modular Extended Green Push Button (1NO)

Green extended (projecting) push button, ABB Modular series. 22mm cutout, IP65, with integrated 1NO contact. Extended actuator for gloved operation.

Common Applications

Extended (projecting) green push button from ABB's modular range. The raised actuator protrudes above the panel surface, making it easier to find and press with gloved hands in cold storage, foundry, or heavy manufacturing environments. Used as a start button on ABB drive panels, motor control centers, and process automation systems. The extended profile also reduces accidental activation from objects brushing against the panel — you have to deliberately press the raised button. Pairs with the ABB MP1-01R (red stop) and MCB-10 contact block in ABB-centric installations.

Specifications

Actuator Shape The physical shape of the pressable surface.	Round
Actuator Type The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.	Extended (Projecting)
Certifications Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.	UL, CSA, CE
Color Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).	Green
Contact Configuration Normally Open — circuit is off until you press. Standard for start/go/enable functions.	1NO
Cutout Diameter The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.	22mm
IP Rating IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.	IP65
Material The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.	Plastic
Mounting Type How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.	Panel
Max Operating Temp Highest temperature the button is rated to operate in.	70°C
Min Operating Temp Lowest temperature the button is rated to operate in.	-25°C

Specs with this icon are linked to the manufacturer's original source page

You'll Also Need

This is a modular component. For a complete assembly, you may also need:

MCB-10 required

1NO contact block for ABB modular push buttons

Compatible Alternatives

These products are functionally equivalent cross-references from other manufacturers.

ABB

MP1-10G

Modular Green Flush Push Button (1NO)

IDEC

HW1B-M110G

HW Green Flush Push Button (1NO)

Omron

A22-FG-10M

A22 Green Flush Push Button (1NO)

Eaton

M22-D-G

M22 Green Flush Push Button

Siemens

3SU1130-0AB40-1BA0

SIRIUS ACT Green Flush Push Button (1NO)

Eaton

M22-DP-G-K10

M22 Green Flush Push Button with 1NO Contact Block

Siemens

3SU1100-0AB40-1BA0

SIRIUS ACT Green Flush Push Button Plastic (1NO)

Schneider Electric

ZB4-BA3

Harmony XB4 Green Flush Push Button Head

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wiring Diagram

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.