Eaton · M22 ซีรีส์

M22-PVT45P

ใช้งานอยู่
UL CSA CE IEC 60947-5-5

M22 Emergency Stop 45mm Mushroom Twist Release

หมายเลขชิ้นส่วน: M22 - PVT45P
Eaton M22 ซีรีส์ Introduced circa 2000
Eaton M22-PVT45P — M22 Emergency Stop 45mm Mushroom Twist Release

Red 45mm mushroom head emergency stop push button with twist-to-release reset for Eaton M22 series. 22.5mm cutout, IP67.

การใช้งานทั่วไป

Heavy-duty emergency stop with an oversized 45mm mushroom head — 5mm larger than standard 40mm e-stops for even easier palm actuation in high-stress situations. The twist-to-release mechanism meets EN/ISO 13850 for Category 0 emergency stops. Found on large industrial presses, steel mill equipment, and heavy machinery where operators may be wearing thick gloves. The larger head also improves visibility from a distance on wide control panels. The IP67 rating suits harsh environments with coolant spray, metal dust, and vibration. Wire the 1NC contact in series with the safety relay or safety PLC input.

ข้อมูลจำเพาะ

Actuator Type
Mushroom Head
Certifications
UL, CSA, CE, IEC 60947-5-5
Color
Red
Contact Configuration
1NC
Cutout Diameter
22.5mm
Head diameter
45mm
IP Rating
IP67
Material
Plastic
Mounting Type
Panel
Reset type
Twist Release

รายการสเปคที่มีไอคอนนี้เชื่อมโยงไปยังหน้าต้นฉบับของผู้ผลิต

คุณยังต้องการ

นี่เป็นส่วนประกอบแบบโมดูลาร์ สำหรับการประกอบที่สมบูรณ์ คุณอาจต้องการ:

ทางเลือกที่ใช้งานร่วมกันได้

ผลิตภัณฑ์เหล่านี้เป็นทางเลือกที่ใช้งานได้เหมือนกันจากผู้ผลิตรายอื่น

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 22.5mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

ขนาด

Front 22.5mm cutout 40mm head Side panel terminals

แผนภาพการเดินสายไฟฟ้า

L T 21 22 NC (closed) opens on press

การแก้ไขปัญหา

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

สถานที่จำหน่าย

ช่วงราคา

$5.6 — $50.96

จาก 4 ผู้จัดจำหน่าย

ข้อมูลจำเพาะอย่างย่อ

Actuator Type
Mushroom Head
Certifications
UL, CSA, CE, IEC 60947-5-5
Color
Red
Contact Configuration
1NC
Cutout Diameter
22.5mm

สิ่งที่ผู้คนพูดถึง

+

“M22-PVT45P meets EN/ISO 13850 requirements. Always wire NC contacts through a safety relay, never direct to contactor. Test monthly.”

Reddit r/PLC 12 โหวตขึ้น ดูเกลียว →

แหล่งข้อมูล

ข้อมูลจำเพาะและข้อมูลผลิตภัณฑ์อ้างอิงจากแหล่งข้อมูลต่อไปนี้

Eaton M22-PVT45P Product Page

https://www.eaton.com/us/en-us/skuPage.M22-PVT45P.html

เข้าถึงเมื่อ March 29, 2026

แหล่งที่มา