Eaton · M22 시리즈

M22-D-G

현행 제품
UL CSA CE ATEX

M22 Green Flush Push Button

부품 번호: M22 - D - G
Eaton M22 시리즈 Introduced circa 2000
Eaton M22-D-G — M22 Green Flush Push Button

Green flush momentary push button for Eaton M22 series. 22.5mm cutout, IP67 front. Complete unit with 1NO contact.

일반적인 용도

Eaton equivalent of the Schneider ZB4-BA3. Found on European-built machinery, food processing equipment, and packaging lines. The M22 series is popular in the automotive manufacturing sector — many German, Austrian, and Czech machine builders spec Eaton by default. IP67 front face with IP69K option handles high-pressure washdown in food and beverage plants. The modular RMQ-Titan system means you can mix and match heads, contact blocks, and LED modules from the same M22 family.

연구 노트

1. 개요

  • 제품: Eaton M22-D-G 모듈형 푸시 버튼 (RMQ-Titan 시리즈 일부).
  • 시리즈 컨텍스트: 산업용 제어 패널에 적합한 22.5mm 플러시 장착형 푸시 버튼.
  • 제조사: 산업용 제어 컴포넌트 분야의 글로벌 리더인 Eaton.
  • 주요 특징: 비조명형, 그린 액추에이터, 실버 베젤, 모멘터리 액션, 고내구성(500만 회 작동).

2. 사용자 평가

  • 평점:
    • Amazon.de: 1.0/5 (리뷰 1개; 상세 정보 없음).
    • Heureka.cz: 리뷰 없음(평점 0개).
  • 불만 사항: 사용 가능한 자료에서 문서화된 사항 없음.

3. 실제 적용 사례

  • 산업/장비:
    • 산업용 기계 제어 패널.
    • 유압 장치(예: 톱, 프레스).
    • 먼지/물 저항이 필요한 환경(IP67/IP69K, NEMA 4X/13).
  • 부적합 용도: 비상 정지 기능(Emas.cz 기준).

4. 기술 사양

  • 치수: 22.5mm 장착 구멍.
  • 보호 등급: IP67/IP69K, NEMA 4X/13.
  • 전기적 사양:
    • AC: 115–500V (50/60Hz).
    • DC: 24–220V.
  • 작동 방식: 모멘터리(스프링 리턴), 비래칭.
  • 재질: 플라스틱 액추에이터, 크롬 도금 베젤.
  • 수명: 500만 회 작동.

5. 주문 및 호환성

  • 가격:
    • 체코 공화국: 118 Kč (Heureka.cz), 710.79 Kč (Emas.cz, 인클로저 변형).
    • 폴란드: 4.44 PLN (E-Automatyka).
    • 독일: €16.61 (Amazon.de, 10개 패키지).
  • 액세서리: M22 시리즈 하우징, 라벨(LabelEditor로 커스터마이징 가능)과 호환.
  • 재고 상태: 일반적으로 재고 있음(유통업체에 따라 다름).

6. 알려진 문제점

  • 문서화된 문제: 자료상 보고된 사항 없음.
  • 제한 사항:
    • 비상 정지용으로 등급되지 않음.
    • 비조명형(저조도 환경에서 사용성 제한).

---
참고: 상세 매뉴얼 또는 교차 참조를 원할 경우 Eaton 또는 공인 유통업체에 문의하십시오. 자료상 사용자 피드백 또는 고장률 데이터가 충분하지 않음.

출처
  1. M22-D-G | Eaton M22 modular pushbutton | Eaton — www.eaton.com
  2. شراء eaton m22 k10 مع شحن مجاني على AliExpress version — ar.aliexpress.com
  3. Eaton M22-D-G 216596 od 118 Kč - Heureka.cz — hlavni-vypinace.heureka.cz
  4. Tlačítka - E-Automation - Průmyslová automatizace a komunikace — cs.e-automatyka.sklep.pl
  5. [PDF] NÁVOD K OBSLUZE - FIPAS — www.fipas.cz
  6. [PDF] Mezinárodní klasifikace nemocí, Instrukční příručka — www.uzis.cz
  7. M22-D-G-X1/KC11/I Skříňka s jedním tlačítkem I zelená 1Z+1V povrchová ... — www.emas.cz
  8. Tlačítko Eaton | Conrad Electronic — www.conrad.cz
  9. Automatisierungstaster in seltsamen Durchmessern ... — forum.zerspanungsbude.net
  10. Eaton M22-D-G Abtasttaster, 3 x 3,0 x 3,0 cm, Grün, 10 Stück - Amazon.de — www.amazon.de

사양 목록

Actuator Function
Momentary
Actuator Shape
Round
Actuator Type
Flush
Bezel
Silver
Certifications
UL, CSA, CE, ATEX
Color
Green
Contact Configuration
1NO
Cutout Diameter
22.5mm
Environmental Rating
IP67, IP69K, NEMA 4X, NEMA 13
Illumination
Non-illuminated
IP Rating
IP67 (front)
Material
Plastic/Metal bezel
Mechanical Life
5,000,000 cycles
Mounting Type
Panel
Operating Cycles
5 million
Max Operating Temp
70°C
Min Operating Temp
-25°C
Series
M22

이 아이콘이 있는 사양은 제조사의 원본 출처 페이지에 연결되어 있습니다

추가로 필요한 부품

이것은 모듈형 부품입니다. 완전한 조립을 위해 다음이 추가로 필요할 수 있습니다:

설치 빠른 참조

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

배선도

L T 11 12 NO (open) press ↓

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

사진 및 도면

이미지: eaton.com

주요 사양

Actuator Function
Momentary
Actuator Shape
Round
Actuator Type
Flush
Bezel
Silver
Certifications
UL, CSA, CE, ATEX

사용자 후기

•

“We're redoing all our control panels and need to pick one brand. The Eaton M22 IP67 rating is slightly better than ABB's IP65, but ABB's modular contact blocks snap on faster during assembly. Price is nearly identical from our distributor.”

Reddit r/PLC by panel_builder_mike 34 추천 스레드 보기 →
+

“We standardized on Eaton M22 across all our plants. The modular system means we keep fewer spares — one contact block fits everything. Silver bezel looks professional too.”

Reddit r/PLC by controls_engineer_42 24 추천 스레드 보기 →

데이터 출처

사양 및 제품 데이터는 다음 참고 자료에서 수집되었습니다.

Eaton M22-D-G Product Page

https://www.eaton.com/us/en-us/skuPage.M22-D-G.html

접속일 March 28, 2026

출처