Schneider Electric · Harmony XB5 Series

ZB5AT84

Active
UL LISTED CSA MARINE BV DNV LROS

Schneider ZB5AT84 Emergency Stop Head, Red Ø40 mm Mushroom, Push-Pull (Harmony XB5, plastic)

Part number: ZB5 - A
Schneider Electric Harmony XB5 Series
Schneider Electric ZB5AT84 — Schneider ZB5AT84 Emergency Stop Head, Red Ø40 mm Mushroom, Push-Pull (Harmony XB5, plastic)

Schneider Harmony XB5 22 mm emergency-stop head: dark grey plastic bezel, red Ø40 mm mushroom, trigger action and mechanical latching, push-pull (pull to release). Head only — the body with normally-closed contacts is ordered separately.

Common Applications

Plastic push-pull Ø40 mm emergency-stop head for 22 mm panels and stations; used as Tesla Powerwall 3's remote shutdown switch and as Genie lift part 66812.

Research Notes

What it is

The operating head of a 22 mm emergency-stop button from Schneider Electric's plastic Harmony XB5 range: a dark grey plastic bezel and a red Ø40 mm mushroom. Pushed, it latches (trigger action, mechanical latching); it is released by pulling it back out (push-pull). Schneider's turn-to-release version is the ZB5AS844; the key-release ones are ZB5AS934/944.

It is a head only. It has no contacts. Add a Harmony XB5 body with normally-closed contacts (for example ZB5AZ102 with 1 NC, or ZB5AZ104 with 2 NC), or buy the complete XB5AT842 (1 NC).

Key specifications (Schneider datasheet)

  • Operator: red mushroom Ø40 mm, unmarked; trigger action, mechanical latching, push-pull
  • Bezel: dark grey plastic (Harmony XB5)
  • Mechanical life: 300,000 cycles
  • Protection: IP66, IP67, IP69, IP69K; UL Type 4X/13; IK03
  • Mounting: 22.5 mm hole; up to 4 contacts behind it
  • Temperature: −40 to +70 °C
  • Weight: 50 g
  • Standards: ISO 13850, IEC 60947-5-5, IEC 60204-1, UL 508, CSA C22.2 No 14; marine BV, DNV, Lloyd's Register
  • Codes: EAN 3389110907742; country of origin Czech Republic

Status and price

Active; "normally stocked in distribution" according to Schneider (November 2026).

Prices seen in November 2026:

  • US: Kempston $31.25; RSP Supply $35.43; Echo Electric $44.41; Newark $55.37–66.21
  • UK: Kempston £23.34; RS £23.57 (ex VAT)
  • Europe: Automation24 €14.60 (business price); Conrad €15.67 ex VAT (€23.99); Bürklin €19.97 ex VAT; Mouser €32.44; typical shop price about €16
  • Elsewhere: Australia A$61.49 (RS)

Related parts

  • Complete unit with this head: XB5AT842 (1 NC); XB5AT845 is another contact version
  • Other XB5 emergency-stop heads: ZB5AS844 (turn to release), ZB5AS934/ZB5AS944 (key release)
  • Body and contacts: ZB5AZ102 (1 NC), ZB5AZ104 (2 NC); ZB5AZ009 fixing collar with ZBE102 (1 NC) contact blocks
  • Enclosure and guards: XALD01H7 (single enclosure); ZBZ1605 (yellow) and ZBZ1602 (black, low) guards

Where it is used

  • Tesla Powerwall 3: Tesla's installation manuals offer it as the remote System Shutdown Switch that triggers rapid shutdown: ZB5AT84 head, ZB5AZ009 collar and ZBE102 contact block in an XALD01H7 enclosure, with a ZBZ1605 or ZBZ1602 guard. (The other option is Eaton's M22-PVT.)
  • Genie aerial work platforms: it is the emergency stop sold as Genie part 66812 / 66812GT. Parts suppliers list it as "66812 … ZB5AT84", and replacement sellers offer it for Genie GR, GS and Z models.
  • Schneider's own AS-Interface e-stops list it as the push-pull head option.

Buying notes

  • Head only, and use NC contacts. An emergency stop must open its circuit.
  • Push-pull, not turn. Some shops describe it as "twist-release" or "turn to release / key switch" (industrialautomationcanada.com, elsotech.com.my, wolfautomation.mx). It is released by pulling; the turn-to-release head is the ZB5AS844.
  • Plastic, IK03. For a metal head, look at the Harmony XB4 range.
  • Genuine or look-alike? Most shop pages name Schneider, but on marketplaces only about a quarter of the listings we read do. Replacement "66812GT" buttons for Genie lifts are often brandless.
  • Origin: some Amazon listings give Germany or France; Schneider gives the Czech Republic.

What users say

No written reviews were found. The genuine Amazon listing (B000WLB060) holds 5.0★ from 3 ratings.

6 sources
  1. Schneider Electric product page and datasheet: ZB5AT84 (November 2026) — Schneider Electric
  2. Tesla Powerwall 3 installation manual: System Shutdown Switch (ZB5AT84 option) — Tesla
  3. Liftbay: GENIE 66812 Not-Aus (66812GT = ZB5AT84) — liftbay.de
  4. Platform Parts: Genie emergency stop 66812, alternative for ZB5AT84 — platformparts.com
  5. Schneider AS-Interface e-stop leaflet: push-pull head ZB5-AT84 — Schneider Electric (via manuals.co.uk)
  6. Amazon: genuine ZB5AT84 listing — Amazon
About the Harmony XB5 range

Applies to every part of the range, not only the ZB5AT84.

What the range is

Harmony XB5 is Schneider Electric's range of plastic 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights. It is double insulated (Class II), with a dark-grey bezel or, for many parts, a light-grey one. It is the plastic twin of the metal Harmony XB4: same functions, same 22 mm hole, and largely the same spare parts. Flush versions for a 30 mm hole are sold as XB5F / ZB5F.

How the part numbers fit together

  • Complete unit = body + head. XB5AD33 is the body with two NO contacts (ZB5AZ103) plus the head (ZB5AD3). You can also buy fixing collar ZB5AZ009, contact blocks and the head separately.
  • Grey bezel: add C0 (XB5AD33 → XB5AD33C0).
  • Push-in terminals: complete units ending in 5 (XB5AD335).
  • Selector heads work as on XB4: ZB5AD2 two positions stay put; ZB5AD4 spring return from right to left; ZB5AD3 three positions stay put; ZB5AD5 spring return to centre; ZB5AD7 / ZB5AD8 spring return from left / right to centre. J is the long handle (ZB5AJ3), G a key switch.
  • Bodies with contacts: ZB5AZ101 (1 NO), ZB5AZ102 (1 NC), ZB5AZ103 (2 NO), ZB5AZ104 (2 NC), ZB5AZ105 (1 NO + 1 NC), ZB5AZ141 (1 NO + 2 NC).

Shared with Harmony XB4

The contact blocks (ZBE101 NO, ZBE102 NC, ZBE203/204/205 doubles, low-power ZBE1016) and the Universal LED light blocks (ZBVB1, ZBVG1, ZBVM1) have the same references for both ranges. So do the legend holders (ZBZ32), printed legends (e.g. ZBY2385 "AUTO-O-HAND"), the selector guard ZBZ2102 and the emergency-stop guard ZBZ1605. Parts specific to XB5 are the fixing collar ZB5AZ009, the blanking plug ZB5SZ3, the 30 mm flush kits ZB5AZ021 / ZB5AZ022, the spare fixing nut ZB5AZ901 and the nut tool ZB5AZ905.

Ratings for the range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; −40 to +70 °C; double insulated
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals
  • Impact: the catalogue says "up to IK06" on one page and "up to IK03" on another, while the datasheets we checked (XB5AD33, XB5AD33N) say IK04
  • Chemical resistance is the range's selling point against metal XB4; for impact, vibration and heat Schneider points to XB4 (IK06)

Installing

Unlike XB4, the head is held by a plastic nut at the front, tightened with Schneider's tool ZB5AZ905 to 2.2 N·m. The body then clips on from behind. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m.

Watch out: XB5…N is a different, local range

Codes ending in N (XB5AD33N, "Harmony XB5N / XB7N") are Schneider's local range for India, not the global XB5 part:

XB5AD33 (global XB5)XB5AD33N (local XB5N)
ProtectionIP67, IP69, IP69KIP65 (the product web page says IP54)
Operating temperature−40 to +70 °C−25 to +70 °C
CertificationsUL, CSA, BVCE
Contacts, ratings, 1 M cycles, Class IIsamesame

Both are genuine Schneider parts. For washdown, outdoor or North American (UL) use, order the code without the N. Schneider China notes the same split: XB5 exists as imported and locally made models, while XB4 is imported only.

Buying notes

  • Look-alikes: XB5 is also used as a generic type name. Amazon sells unbranded "XB5" pushbuttons and selectors that are not Schneider products.
  • Reviews: some Indian shop pages carry templated reviews, with the same five reviewer names and dates on different products. We ignored those.
  • Problems in use: we found no recurring failure pattern for XB5 (we searched for cracked or loose nuts and broken selectors in five languages).
7 sources
  1. Harmony XB5 plastic Control and signaling units catalog (DIA5ED2121213EN, January 2026) — Schneider Electric
  2. XB5AD33 product page and datasheet — Schneider Electric India
  3. XB5AD33N (Harmony XB5N/XB7N, local range) product page and datasheet — Schneider Electric India
  4. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  5. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  6. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  7. Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts — Schneider Electric, YouTube

Specifications

Actuator Type
Mushroom Ø40 mm, red, unmarked
Bezel material
Dark grey plastic (Harmony XB5)
Bodies
ZB5AZ102 (1 NC), ZB5AZ104 (2 NC)
Certifications
UL Listed, CSA; marine BV, DNV, LROS
Complete unit
XB5AT842 (1 NC); XB5AT845
Component type
head
Contact Configuration
None (head only)
Country of origin
Czech Republic
Cutout Diameter
22.5mm
Dimensions
40 × 40 × 56 mm
Ean
3389110907742
Enclosure type
UL Type 4X/13
Ik rating
IK03
IP Rating
IP66, IP67, IP69, IP69K
Mechanical Life
300,000 cycles
Oem part numbers
Genie 66812 / 66812GT
Max Operating Temp
+70°C
Min Operating Temp
-40°C
Pn status
verified-catalogue
Release
Push-pull (pull to release)
Standards
ISO 13850, IEC 60947-5-5, IEC 60204-1, IEC 60947-5-1, UL 508, CSA C22.2 No 14, GB 14048.5
Switching function
Trigger action, mechanical latching
Turn release version
ZB5AS844
Weight
50 g

Installation Quick Reference

Panel cutout: 22.5mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

Dimensions

Front 22.5mm cutout 40mm head Side panel terminals

Wiring Diagram

L T 11 12 NO (open) press ↓

Troubleshooting

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Removing Contacts from Harmony XB5/ZB5 22mm Push Button | Schneider Electric Support

Schneider Electric · watch on YouTube

Disassembling a Harmony XB5 ZB5 22mm Plastic Push Button & Contacts | Schneider Electric Support

Schneider Electric · watch on YouTube

Mounting the Harmony XB5/ZB5 22mm Plastic Push Button & Contacts | Schneider Electric Support

Schneider Electric · watch on YouTube

Quick Specs

Actuator Type
Mushroom Ø40 mm, red, unmarked
Bezel material
Dark grey plastic (Harmony XB5)
Bodies
ZB5AZ102 (1 NC), ZB5AZ104 (2 NC)
Certifications
UL Listed, CSA; marine BV, DNV, LROS
Complete unit
XB5AT842 (1 NC); XB5AT845