M22-D-Y
在产M22 Yellow Flush Push Button
Yellow flush momentary push button for Eaton M22 series. 22.5mm cutout, IP67 front. Complete unit with 1NO contact.
常见应用
Yellow push button used for abnormal or intervention functions per IEC 60204-1 — yellow signals caution or an action to suppress an abnormal condition. Common on conveyor systems for jam-clear functions, packaging lines for fault reset, and process control panels for alarm acknowledgement. In many panel designs, the yellow button sits between the green start and red stop as the operator's go-to for clearing faults without a full restart. The M22 series IP67 front face handles washdown environments. Pairs with the M22-D-G (green start) and M22-D-R (red stop) for a complete three-button station.
规格参数
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE, ATEX
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67 (front)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic/Metal bezel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
5,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
带有此图标的规格参数链接到制造商的原始来源页面
兼容替代品
这些产品是来自其他制造商的功能等效互换产品。
安装快速参考
Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
尺寸
接线图
故障排除
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
购买渠道
价格范围
$1.94 — $10.54
来自 4 家经销商
快速规格
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE, ATEX
- Color
- Yellow
- Contact Configuration
- 1NO
用户评价
“Yellow means caution or intervention per IEC 60204-1. We use them for reset buttons after a fault, jog functions, and test/manual override. Never use yellow for start or stop — that confuses operators.”
了解更多
数据来源
规格参数和产品数据来源于以下参考资料。
Eaton M22-D-Y Product Page
https://www.eaton.com/us/en-us/skuPage.M22-D-Y.html
访问日期 March 29, 2026