Siemens · SIRIUS ACT 3SU1 Series

3SU1130-0AB30-1BA0

Name: Siemens 3SU1130-0AB30-1BA0
Brand: Siemens
SKU: 3SU1130-0AB30-1BA0

Active

UL UL Listed — meets US safety standards. Required for NEC-inspected installations. CSA CSA Certified — meets Canadian safety standards. Required for installations in Canada. CE CE Marked — complies with EU directives (Low Voltage, Machinery, EMC). ATEX ATEX Certified — approved for potentially explosive atmospheres (gas/dust zones). IECEX

SIRIUS ACT Yellow Flush Push Button (1NO)

Part number: 3SU1 SIRIUS ACT operator panel devices - 1 Metal front ring (premium) - 30 Flush push button - 30 Yellow - 1BA0 1NO contact

Siemens SIRIUS ACT 3SU1 Series Introduced circa 2013

Siemens 3SU1130-0AB30-1BA0 — SIRIUS ACT Yellow Flush Push Button (1NO)

Yellow flush momentary push button, Siemens SIRIUS ACT series. 22mm cutout, IP66/IP67/IP69K, metal housing, with 1NO contact.

Common Applications

Yellow push button from the SIRIUS ACT range used for intervention and fault-reset functions per IEC 60204-1. Found on Siemens-automated production lines for alarm acknowledgement, fault reset after a safety event, and jog/inch functions on machine tools. The metal front ring and IP66/IP67/IP69K rating make it suitable for harsh automotive and pharmaceutical environments where hygiene washdown is required. In Siemens S7 safety programs, this button typically feeds a fault-acknowledge input that clears latched safety alarms. Pairs with the green 3SU1130-0AB40-1BA0 and red 3SU1130-0AB20-1CA0 on standard three-button stations.

Specifications

Actuator Shape The physical shape of the pressable surface.	Round
Actuator Type The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.	Flush
Certifications Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.	UL, CSA, CE, ATEX, IECEx
Color Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).	Yellow
Contact Configuration Normally Open — circuit is off until you press. Standard for start/go/enable functions.	1NO
Cutout Diameter The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.	22mm
IP Rating IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.	IP66/IP67/IP69K
Material The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.	Metal
Mounting Type How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.	Panel
Max Operating Temp Highest temperature the button is rated to operate in.	70°C
Min Operating Temp Lowest temperature the button is rated to operate in.	-25°C

Compatible Alternatives

These products are functionally equivalent cross-references from other manufacturers.

Omron

A22-FY-10M

A22 Yellow Flush Push Button (1NO)

Eaton

M22-D-Y

M22 Yellow Flush Push Button

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wiring Diagram

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.