ZB4-BG1
Hoạt độngHarmony XB4 2-Position Key Switch
2-position key-operated selector switch head for Schneider Harmony XB4 series. 22mm cutout, IP66. Key removable in both positions.
Ứng Dụng Phổ Biến
Key-operated selector switch used to restrict access to specific machine modes — only personnel with the key can switch between positions. Common on pharmaceutical filling lines (locking out manual mode during production), food processing equipment (preventing unauthorized recipe changes), and building HVAC panels (restricting access to maintenance mode). The maintained 2-position action stays in the selected position when the key is removed from either position. Pairs with ZB4-BZ101 or ZB4-BZ102 contact blocks depending on whether the application needs NO or NC contacts.
Thông số kỹ thuật
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Key
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO (with ZB4-BZ101)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất
Bạn Cũng Cần
Đây là một thành phần mô-đun. Để lắp ráp hoàn chỉnh, bạn có thể cần thêm:
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Dải giá
$2.71 — $85.08
từ 4 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator Type
- Key
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO (with ZB4-BZ101)
- Cutout Diameter
- 22mm
- IP Rating
- IP66
Những Đánh Giá Từ Khách Hàng
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
Tìm Hiểu Thêm
Nguồn Dữ Liệu
Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.