ZB4-BG1
ActivoHarmony XB4 2-Position Key Switch
2-position key-operated selector switch head for Schneider Harmony XB4 series. 22mm cutout, IP66. Key removable in both positions.
Aplicaciones comunes
Key-operated selector switch used to restrict access to specific machine modes — only personnel with the key can switch between positions. Common on pharmaceutical filling lines (locking out manual mode during production), food processing equipment (preventing unauthorized recipe changes), and building HVAC panels (restricting access to maintenance mode). The maintained 2-position action stays in the selected position when the key is removed from either position. Pairs with ZB4-BZ101 or ZB4-BZ102 contact blocks depending on whether the application needs NO or NC contacts.
Especificaciones
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Key
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO (with ZB4-BZ101)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
|
Positions
|
2
|
|
Return type
|
Maintained
|
Las especificaciones con este icono están vinculadas a la página fuente original del fabricante
También necesitará
Este es un componente modular. Para un ensamblaje completo, también puede necesitar:
Referencia rápida de instalación
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensiones
Diagrama de cableado
Solución de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Dónde comprar
Rango de precios
$2.71 — $85.08
en 4 distribuidores
Especificaciones rápidas
- Actuator Type
- Key
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO (with ZB4-BZ101)
- Cutout Diameter
- 22mm
- IP Rating
- IP66
Lo que dicen los usuarios
“Good selector for mode control applications. Make sure you get the right number of positions and maintained vs spring-return for your application.”
Más información
Fuentes de datos
Especificaciones y datos de producto obtenidos de las siguientes referencias.