Schneider Electric · Harmony XB6 Dòng sản phẩm

XB6EA42B

Hoạt động
CE

16mm Red Push Button XB6 1NC

Mã sản phẩm: A - 4
Schneider Electric Harmony XB6 Dòng sản phẩm Introduced circa 2005

Schneider Harmony XB6 16mm red push button.

Ứng Dụng Phổ Biến

Compact 16mm stop button. For panels where 22mm is too large.

Thông số kỹ thuật

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm
IP Rating
IP65

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 16mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Front 16mm cutout panel hole diameter Side panel contact ~45mm depth

Sơ đồ đấu dây

L T 21 22 NC (closed) opens on press

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Nơi Mua Hàng

Dải giá

$11.74 — $133.08

từ 2 nhà phân phối

Thông số kỹ thuật nhanh

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm

Những Đánh Giá Từ Khách Hàng

+

“Compact 16mm stop button. For panels where 22mm is too large.”

Reddit r/PLC 14 lượt bình chọn Xem ren