Schneider Electric · Harmony XB6 Serie

XB6EA42B

Attivo
CE

16mm Red Push Button XB6 1NC

Codice articolo: A - 4
Schneider Electric Harmony XB6 Serie Introduced circa 2005

Schneider Harmony XB6 16mm red push button.

Applicazioni Comuni

Compact 16mm stop button. For panels where 22mm is too large.

Specifiche

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm
IP Rating
IP65

Guida Rapida all'Installazione

Panel cutout: 16mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensioni

Front 16mm cutout panel hole diameter Side panel contact ~45mm depth

Schema di Cablaggio

L T 21 22 NC (closed) opens on press

Risoluzione dei Problemi

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Dove Acquistare

Fascia di prezzo

$11.74 — $133.08

presso 2 distributori

Specifiche Rapide

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm

Cosa Dicono gli Utenti

+

“Compact 16mm stop button. For panels where 22mm is too large.”

Reddit r/PLC 14 voti positivi Vedi discussione →