Schneider Electric · Harmony XB6 Серия

XB6EA42B

В производстве
CE

16mm Red Push Button XB6 1NC

Артикул: A - 4
Schneider Electric Harmony XB6 Серия Introduced circa 2005

Schneider Harmony XB6 16mm red push button.

Типичные применения

Compact 16mm stop button. For panels where 22mm is too large.

Характеристики

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm
IP Rating
IP65

Краткое руководство по монтажу

Panel cutout: 16mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Габаритные размеры

Front 16mm cutout panel hole diameter Side panel contact ~45mm depth

Схема подключения

L T 21 22 NC (closed) opens on press

Устранение неисправностей

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Где купить

Диапазон цен

$11.74 — $133.08

у 2 дистрибьюторов

Краткие характеристики

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm

Что говорят пользователи

+

“Compact 16mm stop button. For panels where 22mm is too large.”

Reddit r/PLC 14 голосов Перейти к обсуждению →