Schneider Electric · Harmony XB6 ซีรีส์

XB6EA42B

ใช้งานอยู่
CE

16mm Red Push Button XB6 1NC

หมายเลขชิ้นส่วน: A - 4
Schneider Electric Harmony XB6 ซีรีส์ Introduced circa 2005

Schneider Harmony XB6 16mm red push button.

การใช้งานทั่วไป

Compact 16mm stop button. For panels where 22mm is too large.

ข้อมูลจำเพาะ

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm
IP Rating
IP65

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 16mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

ขนาด

Front 16mm cutout panel hole diameter Side panel contact ~45mm depth

แผนภาพการเดินสายไฟฟ้า

L T 21 22 NC (closed) opens on press

การแก้ไขปัญหา

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

สถานที่จำหน่าย

ช่วงราคา

$11.74 — $133.08

จาก 2 ผู้จัดจำหน่าย

ข้อมูลจำเพาะอย่างย่อ

Actuator Type
Flush
Certifications
CE
Color
Red
Contact Configuration
1NC
Cutout Diameter
16mm

สิ่งที่ผู้คนพูดถึง

+

“Compact 16mm stop button. For panels where 22mm is too large.”

Reddit r/PLC 14 โหวตขึ้น ดูเกลียว →