RELAY-BYPASS-PCB
Hoạt độngRelay Bypass PCB (Guitar Pedal Soft-Touch)
Relay bypass PCB — replaces mechanical 3PDT with soft-touch momentary + relay.
Ứng Dụng Phổ Biến
The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (silent switching), LED control included, and relays last millions of cycles vs 30K for 3PDT. Popular in premium boutique pedals (Strymon, Chase Bliss, Walrus Audio).
Ghi chú Nghiên cứu
1. Overview
A relay bypass PCB is a small board that gives a DIY guitar pedal true bypass using a soft-touch momentary footswitch driving a signal relay — instead of a mechanical 3PDT. A tiny microcontroller reads a light momentary switch tap and flips a DPDT relay to route the audio around (or through) the effect, plus switches the status LED. Because the audio is switched by a relay and the foot switch is a momentary button, it is silent (with anti-pop), soft to press, and far more durable than a mechanical 3PDT. Popular open-source designs (e.g. mstratman "relay-bypass") and many commercial modules exist.
2. User Sentiment
Loved by builders who've worn out mechanical 3PDTs — praised for silent switching (no click/pop), a feather-light momentary press, and near-unlimited life (relay + momentary switch rated in the millions vs ~tens of thousands for a 3PDT). Bonus features are common: momentary vs latching modes (hold for temporary effect), remote/tap switching, and "smart" bypass. Trade-offs: it needs 9 V power (it's an active board), it's more parts/complexity than a passive 3PDT, and cheap relays/firmware quality vary.
3. Real-World Applications
Silent, reliable true-bypass on/off for DIY and boutique pedals — especially gig-critical or high-cycle use where a mechanical 3PDT would wear out or pop. Also enables momentary/hold effects and remote switching.
4. Technical Specifications
- Type: relay-based true-bypass board (soft-touch)
- Control: momentary footswitch (light press) + MCU logic
- Signal switching: DPDT relay (true-bypass audio path) + LED control
- Life: relay + momentary switch ~1,000,000+ operations (vs ~30k for a 3PDT)
- Power: requires 9 V (active circuit); anti-pop/soft-switching
- Features (design-dependent): momentary/latching modes, remote/tap in
5. Ordering & Compatibility
Sold as bare PCBs, kits, or assembled modules by pedal-parts vendors; open-source layouts (e.g. mstratman relay-bypass) are freely available. Pairs with a momentary SPST footswitch (not a 3PDT) and a standard pedal enclosure. Confirm the board's power draw, relay type, and feature set for your build.
6. Known Issues
It's an active board (needs 9 V) with more complexity than a passive 3PDT; relay/firmware quality varies between designs; and it adds a small amount of current draw. But for silence, feel, and longevity it's the preferred modern approach over a mechanical 3PDT.
Nguồn
- mstratman/relay-bypass — soft-touch momentary relay true-bypass — github.com
- Relay Bypass Module for Soft Touch Foot Switch (true bypass) — lovemyswitches.com
Thông số kỹ thuật
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary (tap to toggle)
|
|
Advantages
|
Silent (anti-pop), soft-touch momentary, ~1M+ life (vs ~30k for 3PDT); optional momentary/latching modes
|
|
Contact Configuration
The electrical switching arrangement.
|
DPDT relay (signal) + momentary switch (control)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000+ cycles (relay)
|
|
Requires
|
9V power (active board) + momentary SPST footswitch; open-source designs (mstratman)
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Dải giá
$123.49 — $170.27
across 2 sellers in US dollars
Thông số kỹ thuật nhanh
- Actuator Function
- Momentary (tap to toggle)
- Advantages
- Silent (anti-pop), soft-touch momentary, ~1M+ life (vs ~30k for 3PDT); optional momentary/latching modes
- Contact Configuration
- DPDT relay (signal) + momentary switch (control)
- Mechanical Life
- 1,000,000+ cycles (relay)
- Requires
- 9V power (active board) + momentary SPST footswitch; open-source designs (mstratman)
Những Đánh Giá Từ Khách Hàng
“The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (”