RELAY-BYPASS-PCB
現行品Relay Bypass PCB (Guitar Pedal Soft-Touch)
Relay bypass PCB — replaces mechanical 3PDT with soft-touch momentary + relay.
主な用途
The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (silent switching), LED control included, and relays last millions of cycles vs 30K for 3PDT. Popular in premium boutique pedals (Strymon, Chase Bliss, Walrus Audio).
仕様一覧
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary (tap to toggle)
|
|
Contact Configuration
The electrical switching arrangement.
|
DPDT relay (signal) + momentary switch (control)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000+ cycles (relay)
|
取付クイックリファレンス
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
外形寸法
配線図
トラブルシューティング
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
主要仕様
- Actuator Function
- Momentary (tap to toggle)
- Contact Configuration
- DPDT relay (signal) + momentary switch (control)
- Mechanical Life
- 1,000,000+ cycles (relay)
ユーザーの声
“The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (”