Generic / Multiple OEMs · Relay Bypass Serie

RELAY-BYPASS-PCB

Activo

Relay Bypass PCB (Guitar Pedal Soft-Touch)

Generic / Multiple OEMs Relay Bypass Serie Introduced circa 2015

Relay bypass PCB — replaces mechanical 3PDT with soft-touch momentary + relay.

Aplicaciones comunes

The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (silent switching), LED control included, and relays last millions of cycles vs 30K for 3PDT. Popular in premium boutique pedals (Strymon, Chase Bliss, Walrus Audio).

Notas de Investigación

1. Overview

A relay bypass PCB is a small board that gives a DIY guitar pedal true bypass using a soft-touch momentary footswitch driving a signal relay — instead of a mechanical 3PDT. A tiny microcontroller reads a light momentary switch tap and flips a DPDT relay to route the audio around (or through) the effect, plus switches the status LED. Because the audio is switched by a relay and the foot switch is a momentary button, it is silent (with anti-pop), soft to press, and far more durable than a mechanical 3PDT. Popular open-source designs (e.g. mstratman "relay-bypass") and many commercial modules exist.

2. User Sentiment

Loved by builders who've worn out mechanical 3PDTs — praised for silent switching (no click/pop), a feather-light momentary press, and near-unlimited life (relay + momentary switch rated in the millions vs ~tens of thousands for a 3PDT). Bonus features are common: momentary vs latching modes (hold for temporary effect), remote/tap switching, and "smart" bypass. Trade-offs: it needs 9 V power (it's an active board), it's more parts/complexity than a passive 3PDT, and cheap relays/firmware quality vary.

3. Real-World Applications

Silent, reliable true-bypass on/off for DIY and boutique pedals — especially gig-critical or high-cycle use where a mechanical 3PDT would wear out or pop. Also enables momentary/hold effects and remote switching.

4. Technical Specifications

  • Type: relay-based true-bypass board (soft-touch)
  • Control: momentary footswitch (light press) + MCU logic
  • Signal switching: DPDT relay (true-bypass audio path) + LED control
  • Life: relay + momentary switch ~1,000,000+ operations (vs ~30k for a 3PDT)
  • Power: requires 9 V (active circuit); anti-pop/soft-switching
  • Features (design-dependent): momentary/latching modes, remote/tap in

5. Ordering & Compatibility

Sold as bare PCBs, kits, or assembled modules by pedal-parts vendors; open-source layouts (e.g. mstratman relay-bypass) are freely available. Pairs with a momentary SPST footswitch (not a 3PDT) and a standard pedal enclosure. Confirm the board's power draw, relay type, and feature set for your build.

6. Known Issues

It's an active board (needs 9 V) with more complexity than a passive 3PDT; relay/firmware quality varies between designs; and it adds a small amount of current draw. But for silence, feel, and longevity it's the preferred modern approach over a mechanical 3PDT.


Fuente
  1. mstratman/relay-bypass — soft-touch momentary relay true-bypass — github.com
  2. Relay Bypass Module for Soft Touch Foot Switch (true bypass) — lovemyswitches.com

Especificaciones

Actuator Function
Momentary (tap to toggle)
Advantages
Silent (anti-pop), soft-touch momentary, ~1M+ life (vs ~30k for 3PDT); optional momentary/latching modes
Contact Configuration
DPDT relay (signal) + momentary switch (control)
Mechanical Life
1,000,000+ cycles (relay)
Requires
9V power (active board) + momentary SPST footswitch; open-source designs (mstratman)

Referencia rápida de instalación

Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.

Dimensiones

Diagrama de cableado

Solución de problemas

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

Dónde comprar

Rango de precios

$123.49 — $170.27

across 2 sellers in US dollars

Especificaciones rápidas

Actuator Function
Momentary (tap to toggle)
Advantages
Silent (anti-pop), soft-touch momentary, ~1M+ life (vs ~30k for 3PDT); optional momentary/latching modes
Contact Configuration
DPDT relay (signal) + momentary switch (control)
Mechanical Life
1,000,000+ cycles (relay)
Requires
9V power (active board) + momentary SPST footswitch; open-source designs (mstratman)

Lo que dicen los usuarios

+

“The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (”

Reddit r/guitarpedals 44 votos positivos Ver hilo →