RELAY-BYPASS-PCB
현행 제품Relay Bypass PCB (Guitar Pedal Soft-Touch)
Relay bypass PCB — replaces mechanical 3PDT with soft-touch momentary + relay.
일반적인 용도
The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (silent switching), LED control included, and relays last millions of cycles vs 30K for 3PDT. Popular in premium boutique pedals (Strymon, Chase Bliss, Walrus Audio).
사양 목록
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary (tap to toggle)
|
|
Contact Configuration
The electrical switching arrangement.
|
DPDT relay (signal) + momentary switch (control)
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000+ cycles (relay)
|
설치 빠른 참조
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
외형 치수
배선도
문제 해결
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
주요 사양
- Actuator Function
- Momentary (tap to toggle)
- Contact Configuration
- DPDT relay (signal) + momentary switch (control)
- Mechanical Life
- 1,000,000+ cycles (relay)
사용자 후기
“The modern upgrade to the 3PDT stomp switch. Uses a soft-touch momentary switch (much lighter press) to trigger a relay that does the actual signal switching. Benefits: lighter press, no click noise (”