M22-PV-K01
Hoạt độngM22 Red Mushroom Emergency Stop (Push-Pull)
Red 38mm mushroom head emergency stop push button, push-pull reset, for Eaton M22 series. 22.5mm cutout, IP67.
Ứng Dụng Phổ Biến
Emergency stop with push-pull reset mechanism. The knob must be pulled out to reset — simpler than twist-release for operators wearing heavy gloves (common in cold storage, meat processing). Found on food processing lines, warehouse conveyor systems, and agricultural equipment. The maintained push-pull action provides clear visual indication: button extended = machine can run, button pushed in = machine stopped. Wire the NC contact in series with the safety relay.
Thường Được Tìm Thấy Trên
Thông số kỹ thuật
|
Actuator
|
Knob, push-pull
|
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Mushroom Head
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE, IEC 60947-5-5
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.
|
1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Environmental Rating
Combined dust/water/impact protection. IP67 = dust-tight + survives temporary submersion. NEMA 4X = corrosion-resistant outdoor use.
|
IP67, IP69K, NEMA 4X, NEMA 13
|
|
Head diameter
|
38mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Non-illuminated
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Reset type
|
Push-Pull
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
M22
|
|
UPC
Universal Product Code for ordering and inventory tracking.
|
786685271743
|
Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất
Bạn Cũng Cần
Đây là một thành phần mô-đun. Để lắp ráp hoàn chỉnh, bạn có thể cần thêm:
Các Lựa Chọn Tương Thích
Các sản phẩm này là các tham chiếu chéo tương đương về chức năng từ các nhà sản xuất khác.
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22.5mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Nơi Mua Hàng
Dải giá
$6.37 — $36.41
từ 4 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator
- Knob, push-pull
- Actuator Function
- Maintained
- Actuator Type
- Mushroom Head
- Certifications
- UL, CSA, CE, IEC 60947-5-5
- Color
- Red
Những Đánh Giá Từ Khách Hàng
“M22-PV-K01 meets EN/ISO 13850 requirements. Always wire NC contacts through a safety relay, never direct to contactor. Test monthly.”
Tìm Hiểu Thêm
Nguồn Dữ Liệu
Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.
M22-PV-K01 Eaton Product Page
https://www.eaton.com/us/en-us/skuPage.M22-PV-K01.html
Truy cập ngày March 28, 2026
