Eaton · M22 السلسلة

M22-PV-K01

Name: Eaton M22-PV-K01
Brand: Eaton
SKU: M22-PV-K01
Price: 10.75 USD
Availability: InStock

نشط

UL UL Listed — meets US safety standards. Required for NEC-inspected installations. CSA CSA Certified — meets Canadian safety standards. Required for installations in Canada. CE CE Marked — complies with EU directives (Low Voltage, Machinery, EMC). IEC 60947-5-5

M22 Red Mushroom Emergency Stop (Push-Pull)

رقم القطعة: M22 22mm RMQ-Titan series - PV Emergency stop, push-pull reset - K01 With 1NC contact block

Eaton M22 السلسلة Introduced circa 2000

Eaton M22-PV-K01 — M22 Red Mushroom Emergency Stop (Push-Pull)

Red 38mm mushroom head emergency stop push button, push-pull reset, for Eaton M22 series. 22.5mm cutout, IP67.

التطبيقات الشائعة

Emergency stop with push-pull reset mechanism. The knob must be pulled out to reset — simpler than twist-release for operators wearing heavy gloves (common in cold storage, meat processing). Found on food processing lines, warehouse conveyor systems, and agricultural equipment. The maintained push-pull action provides clear visual indication: button extended = machine can run, button pushed in = machine stopped. Wire the NC contact in series with the safety relay.

يوجد عادة في

Grundfos CR Pump Station (Emergency Stop)

Buhler Sortex Optical Sorter (Emergency Stop)

Hyster H50FT Forklift (Emergency Stop)

المواصفات

Actuator	Knob, push-pull
Actuator Function Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.	Maintained
Actuator Type The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.	Mushroom Head
Certifications Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.	UL, CSA, CE, IEC 60947-5-5
Color Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).	Red
Contact Configuration Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.	1NC
Cutout Diameter The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.	22.5mm
Environmental Rating Combined dust/water/impact protection. IP67 = dust-tight + survives temporary submersion. NEMA 4X = corrosion-resistant outdoor use.	IP67, IP69K, NEMA 4X, NEMA 13
Head diameter	38mm
Illumination Whether the button has a built-in light. Illuminated buttons show status (lit = active).	Non-illuminated
IP Rating IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.	IP67
Material The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.	Plastic
Mounting Type How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.	Panel
Reset type	Push-Pull
Series The manufacturer's product family. Products in the same series share mounting systems and accessories.	M22
UPC Universal Product Code for ordering and inventory tracking.	786685271743

المواصفات بهذه الأيقونة مرتبطة بصفحة المصدر الأصلية للشركة المصنعة

ستحتاج أيضًا إلى

هذا مكون نمطي. للحصول على تجميع كامل، قد تحتاج أيضًا إلى:

ZB4-BZ101 موصى به

1NO contact block (Schneider ZB4-BZ101 — 22mm compatible)

بدائل متوافقة

هذه المنتجات هي مراجع تبادلية مكافئة وظيفيًا من شركات مصنعة أخرى.

Siemens

3SU1150-1HB20-1CH0

SIRIUS ACT Red Mushroom Emergency Stop (Push-Pull)

ABB

MPET4-10R

Modular Red Mushroom Emergency Stop (Push-Pull)

Schneider Electric

ZB4-BS844

Harmony XB4 Red Mushroom Emergency Stop (Push-Pull)

مرجع سريع للتركيب

Panel cutout: 22.5mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

الأبعاد

مخطط التوصيل

استكشاف الأعطال وإصلاحها

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.