AR22PR-122R
AktifAR22 22mm Red Indicator 24V
Fuji AR22 red indicator.
Yaygın Uygulamalar
Fault indicator for Fuji panels.
Teknik Özellikler
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None (indicator)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
Fuji Electric AR22 command devices
|
Hızlı Montaj Kılavuzu
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Boyutlar
Bağlantı Şeması
Sorun Giderme
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Nereden Satın Alınır
Fiyat aralığı
$1.49 — $17.48
2 distribütörde
Kısa Teknik Özellikler
- Certifications
- JIS, UL, CE
- Color
- Red
- Contact Configuration
- None (indicator)
- Cutout Diameter
- 22mm
- Device type
- Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
Kullanıcı Görüşleri
“Fault indicator for Fuji panels.”