AR22PR-122R
AktiivneAR22 22mm Red Indicator 24V
Fuji AR22 red indicator.
Tüüpilised rakendused
Fault indicator for Fuji panels.
Spetsifikatsioonid
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None (indicator)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
Fuji Electric AR22 command devices
|
Paigalduse kiirjuhend
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Mõõtmed
Ühenduseskeem
Veaotsing
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Kust osta
Hinnavahemik
$1.49 — $17.48
2 edasimüüja juures
Kiirspetsifikatsioonid
- Certifications
- JIS, UL, CE
- Color
- Red
- Contact Configuration
- None (indicator)
- Cutout Diameter
- 22mm
- Device type
- Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
Mida kasutajad ütlevad
“Fault indicator for Fuji panels.”