AR22PR-122R
ActifAR22 22mm Red Indicator 24V
Fuji AR22 red indicator.
Applications courantes
Fault indicator for Fuji panels.
Research Notes
1. Overview
The Fuji Electric AR22PR-122R is a 22 mm red pilot (indicator) light from Fuji's AR22 command-device series — an illuminated status light, not a pushbutton. It runs on 24 V and shows machine/process status (red = fault/stop/danger/abnormal). As an indicator it has no switching contact. JIS Japanese standard, also UL/CE. It's the red sibling of the green AR22PR-122G (#514).
2. User Sentiment
Fuji AR22 pilot lights are a standard, reliable 22 mm indicator line — solid build, JIS compliance, broad availability in Fuji/Japanese-standard control gear. The practical points are choosing the correct lens color (red) and LED voltage (24 V), and remembering it's a status light (no contact).
3. Real-World Applications
Panel/machine status indication — red lit lens for fault/stop/danger/abnormal conditions on a 24 V supply, alongside AR22 pushbuttons and other indicators.
4. Technical Specifications
- Type: Fuji AR22 pilot (indicator) light, 22 mm — not a pushbutton
- Color: red
- Voltage: 24 V (LED)
- Contacts: none (indicator — no switching contact)
- Cutout: 22 mm
- Sealing: IP65 (series)
- Approvals: JIS, UL, CE
5. Ordering & Compatibility
Fits standard 22 mm cutouts. Confirm the lens color (red) and LED voltage (24 V) from the exact code. Part of the Fuji AR22 command family; pairs with AR22 pushbuttons on the panel.
6. Known Issues
No notable reliability issues — a mainstream Fuji indicator. Practical care: match the LED voltage (24 V) and lens color; it's a status light (no switching contact), not a pushbutton.
2 sources
- Fuji AR22 22mm pilot lights / indicators (red, 24V) — fujielectric.com
- Fuji AR22PR-122R 22mm red pilot light 24V — mouser.com
Spécifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None (indicator)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
Fuji Electric AR22 command devices
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Dimensions
Schéma de câblage
Dépannage
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Où acheter
Fourchette de prix
$1.49 — $17.48
chez 2 distributeurs
Spécifications rapides
- Certifications
- JIS, UL, CE
- Color
- Red
- Contact Configuration
- None (indicator)
- Cutout Diameter
- 22mm
- Device type
- Fuji AR22 22mm red pilot (indicator) light (24V; status, NOT a pushbutton)
Ce qu'en disent les utilisateurs
“Fault indicator for Fuji panels.”