MP3-10G
В производствеModular Extended Green Push Button (1NO)
Green extended (projecting) push button, ABB Modular series. 22mm cutout, IP65, with integrated 1NO contact. Extended actuator for gloved operation.
Типичные применения
Extended (projecting) green push button from ABB's modular range. The raised actuator protrudes above the panel surface, making it easier to find and press with gloved hands in cold storage, foundry, or heavy manufacturing environments. Used as a start button on ABB drive panels, motor control centers, and process automation systems. The extended profile also reduces accidental activation from objects brushing against the panel — you have to deliberately press the raised button. Pairs with the ABB MP1-01R (red stop) and MCB-10 contact block in ABB-centric installations.
Характеристики
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Extended (Projecting)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
Характеристики с этим значком ведут на оригинальную страницу производителя
Вам также потребуется
Это модульный компонент. Для полной сборки вам также могут потребоваться:
Совместимые альтернативы
Эти товары являются функционально эквивалентными аналогами от других производителей.
IDEC
HW1B-M110G
HW Green Flush Push Button (1NO)
Omron
A22-FG-10M
A22 Green Flush Push Button (1NO)
Siemens
3SU1130-0AB40-1BA0
SIRIUS ACT Green Flush Push Button (1NO)
Eaton
M22-DP-G-K10
M22 Green Flush Push Button with 1NO Contact Block
Siemens
3SU1100-0AB40-1BA0
SIRIUS ACT Green Flush Push Button Plastic (1NO)
Schneider Electric
ZB4-BA3
Harmony XB4 Green Flush Push Button Head
Eaton
M22-D-G
M22 Green Flush Push Button
ABB
MP1-10G
Modular Green Flush Push Button (1NO)
Краткое руководство по монтажу
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Габаритные размеры
Схема подключения
Устранение неисправностей
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Где купить
Диапазон цен
$2.4 — $8.53
у 4 дистрибьюторов
Краткие характеристики
- Actuator Shape
- Round
- Actuator Type
- Extended (Projecting)
- Certifications
- UL, CSA, CE
- Color
- Green
- Contact Configuration
- 1NO
Что говорят пользователи
“Use extended (MP3 series) when operators wear thick gloves. Flush buttons in gloved environments lead to accidental double-presses or missed presses. We standardized on ABB MP3-10G for all our cold storage panels and operator complaints dropped to zero.”
Подробнее
Источники данных
Характеристики и данные о товаре получены из следующих источников.
ABB MP3-10G Search Page
https://new.abb.com/products?q=MP3-10G
Дата обращения: March 29, 2026