Happ Controls · Competition Serie

COMPETITION-30

Name: Happ Controls COMPETITION-30
Brand: Happ Controls
SKU: COMPETITION-30

Activ

Competition Concave Arcade Button (30mm)

Happ Controls Competition Serie Introduced circa 1990

Classic American-style 30mm concave push button from Happ Controls with genuine IL/iL Competition microswitch. The definitive Western arcade button — concave plunger design provides a different tactile experience than Japanese convex buttons.

Aplicații frecvente

The standard button in classic American arcade cabinets (Mortal Kombat, NBA Jam, etc.). The concave plunger cups the fingertip for a distinctive feel. Uses a Cherry D44X compatible IL microswitch with heavier actuation force, preferred for games requiring deliberate inputs.

Specificații

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	100g
Color Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).	Various (Red, Blue, Green, Yellow, White, Black)
Contact Configuration Normally Open — circuit is off until you press. Standard for start/go/enable functions.	NO (normally open, SPDT microswitch)
Diameter	30mm (28.5mm mounting)
Material The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.	Nylon
Mechanical Life How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.	10,000,000 cycles
Microswitch Type The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.	Cherry D44X
Mounting Type How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.	screw-in
Panel thickness	1-10mm
Travel Distance How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.	4mm

Specificațiile cu această pictogramă sunt legate de pagina sursă originală a producătorului

Referință rapidă de instalare

Mounting: Snap-in buttons push into a 30mm (28.5mm mounting) hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.

Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.

Dimensiuni

Schemă de cablare

Depanare

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

De unde cumpărați

AliExpress

Vedeți →

Amazon

Vedeți →

Specificații rapide

Actuation Force: 100g
Color: Various (Red, Blue, Green, Yellow, White, Black)
Contact Configuration: NO (normally open, SPDT microswitch)
Diameter: 30mm (28.5mm mounting)
Material: Nylon

Ce spun utilizatorii

•

“Happ Competition buttons have that classic concave feel and loud click. Great for retro cabinets. But for competitive play, Japanese buttons (Sanwa/Seimitsu) are objectively faster due to the shorter travel distance.”

Reddit r/fightsticks by arcade_builder 28 voturi pozitive Vedeți discuția →

Aflați mai multe

Explicarea gradelor de protecție IP

Ce înseamnă IP65, IP66, IP67, IP69K pentru aplicația dvs.

Instrument de căutare butoane

Găsiți butonul potrivit după tip, dimensiune și culoare

Surse de date

Specificațiile și datele produsului provin din următoarele referințe.

COMPETITION-30 Page

https://www.amazon.com/s?k=Happ+Competition+arcade+button

Accesat la April 04, 2026

Sursă