Happ Controls · Competition Série

COMPETITION-30

Name: Happ Controls COMPETITION-30
Brand: Happ Controls
SKU: COMPETITION-30

Actif

Competition Concave Arcade Button (30mm)

Happ Controls Competition Série Introduced circa 1990

Classic American-style 30mm concave push button from Happ Controls with genuine IL/iL Competition microswitch. The definitive Western arcade button — concave plunger design provides a different tactile experience than Japanese convex buttons.

Applications courantes

The standard button in classic American arcade cabinets (Mortal Kombat, NBA Jam, etc.). The concave plunger cups the fingertip for a distinctive feel. Uses a Cherry D44X compatible IL microswitch with heavier actuation force, preferred for games requiring deliberate inputs.

Spécifications

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	100g
Color Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).	Various (Red, Blue, Green, Yellow, White, Black)
Contact Configuration Normally Open — circuit is off until you press. Standard for start/go/enable functions.	NO (normally open, SPDT microswitch)
Diameter	30mm (28.5mm mounting)
Material The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.	Nylon
Mechanical Life How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.	10,000,000 cycles
Microswitch Type The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.	Cherry D44X
Mounting Type How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.	screw-in
Panel thickness	1-10mm
Travel Distance How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.	4mm

Les spécifications avec cette icône sont liées à la page source originale du fabricant

Référence rapide d'installation

Mounting: Snap-in buttons push into a 30mm (28.5mm mounting) hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.

Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.

Dimensions

Schéma de câblage

Dépannage

Not responding to input

Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.

Où acheter

AliExpress

Voir →

Amazon

Voir →

Spécifications rapides

Actuation Force: 100g
Color: Various (Red, Blue, Green, Yellow, White, Black)
Contact Configuration: NO (normally open, SPDT microswitch)
Diameter: 30mm (28.5mm mounting)
Material: Nylon

Ce qu'en disent les utilisateurs

•

“Happ Competition buttons have that classic concave feel and loud click. Great for retro cabinets. But for competitive play, Japanese buttons (Sanwa/Seimitsu) are objectively faster due to the shorter travel distance.”

Reddit r/fightsticks by arcade_builder 28 votes positifs Voir le fil →

En savoir plus

Indices de protection IP expliqués

Ce que signifient IP65, IP66, IP67, IP69K pour votre application

Outil de recherche de boutons

Trouvez le bon bouton par type, taille et couleur

Sources de données

Spécifications et données produit issues des références suivantes.

COMPETITION-30 Page

https://www.amazon.com/s?k=Happ+Competition+arcade+button

Consulté le April 04, 2026

Source