COMPETITION-30
AtivoCompetition Concave Arcade Button (30mm)
Classic American-style 30mm concave push button from Happ Controls with genuine IL/iL Competition microswitch. The definitive Western arcade button — concave plunger design provides a different tactile experience than Japanese convex buttons.
Aplicações comuns
The standard button in classic American arcade cabinets (Mortal Kombat, NBA Jam, etc.). The concave plunger cups the fingertip for a distinctive feel. Uses a Cherry D44X compatible IL microswitch with heavier actuation force, preferred for games requiring deliberate inputs.
Especificações
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
100g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Various (Red, Blue, Green, Yellow, White, Black)
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
NO (normally open, SPDT microswitch)
|
|
Diameter
|
30mm (28.5mm mounting)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Nylon
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
10,000,000 cycles
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Cherry D44X
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
screw-in
|
|
Panel thickness
|
1-10mm
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
4mm
|
Especificações com este ícone estão vinculadas à página fonte original do fabricante
Referência rápida de instalação
Mounting: Snap-in buttons push into a 30mm (28.5mm mounting) hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensões
Diagrama de fiação
Solução de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Onde comprar
Especificações rápidas
- Actuation Force
- 100g
- Color
- Various (Red, Blue, Green, Yellow, White, Black)
- Contact Configuration
- NO (normally open, SPDT microswitch)
- Diameter
- 30mm (28.5mm mounting)
- Material
- Nylon
O que os usuários dizem
“Happ Competition buttons have that classic concave feel and loud click. Great for retro cabinets. But for competitive play, Japanese buttons (Sanwa/Seimitsu) are objectively faster due to the shorter travel distance.”
Saiba mais
Fontes de dados
Especificações e dados de produto obtidos das seguintes referências.
COMPETITION-30 Page
https://www.amazon.com/s?k=Happ+Competition+arcade+button
Acessado em April 04, 2026