ZB4-BP2
ActiveSchneider ZB4BP2 Black Projecting Pushbutton Head (Harmony XB4)
Schneider XB4 red guarded (shrouded) push button.
Common Applications
Guarded button with a raised ring around the actuator that prevents accidental presses. Used for stop buttons near moving machinery where operators might lean against the panel. The guard forces deliberate pressing — you have to reach over the ring to press the button. Also used for critical functions where accidental activation would be costly.
Research Notes
1. Overview
The Schneider Electric ZB4BP2 is a 22 mm metal projecting pushbutton head for the Harmony XB4 / ZB4 system — a black, projecting (raised, larger-cap ~Ø29.5 mm) actuator, momentary (spring-return), non-illuminated, unmarked. As a ZB4 part it is the head only — it mounts on an XB4 body/fixing collar and needs a separate ZB4 contact block to function (the complete factory unit would be XB4-BP2). (Data-quality note: this was cataloged as a "Red Guarded/Shrouded" button — per Schneider's datasheet it is black and projecting (not red, not guarded). Color digit 2 = black; the "BP" actuator = projecting.)
2. User Sentiment
Harmony XB4 metal heads are standard, robust industrial operators. A projecting button has a raised cap that's easy to locate and press by feel/glove — chosen where a prominent, easy-to-hit (non-flush) button is wanted. The key practical point is that ZB4 is modular/head-only: order the head plus the matching contact block and body.
3. Real-World Applications
A black projecting momentary pushbutton for general machine/panel control where a raised, easy-to-press actuator is preferred over a flush one (black = general function/neutral by convention).
4. Technical Specifications
- Type: Harmony XB4/ZB4 metal projecting pushbutton head (head-only)
- Actuator: projecting (raised, ~Ø29.5 mm cap), momentary (spring-return), non-illuminated; black
- Cutout: 22 mm; metal (chrome) bezel
- Contacts: none integral — add a ZB4 contact block (complete unit = XB4-BP2)
- Sealing: IP66 (assembled)
- Approvals: UL, CSA, CE
5. Ordering & Compatibility
Order the ZB4BP2 head plus a Harmony ZB4 contact block and mounting — or buy the complete XB4-BP2 unit. Fits 22 mm cutouts, XB4/XB5 system. Actuator codes: BA = flush, BL/BP = projecting (raised) styles, BW = illuminated, BC = momentary mushroom; color digit 2 = black (4 = red, 3 = green, etc.).
6. Known Issues / DQ
- DQ: it's black and projecting — not "red guarded/shrouded". Corrected here (color + actuator type).
- Practical care: it's a head only (order the contact block/body), it's a projecting (raised) actuator (confirm you don't need flush/guarded/mushroom), and confirm the 22 mm cutout and contact configuration.
2 sources
About the Harmony XB4 range
Applies to every part of the range, not only the ZB4-BP2.
What the range is
Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.
How the part numbers fit together
- Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
- One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
- Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
- Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
- Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
- Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.
Bodies and contact blocks
| Body with contacts | Contacts | Contact block | Type | |
|---|---|---|---|---|
| ZB4BZ101 | 1 NO | ZBE101 | NO | |
| ZB4BZ102 | 1 NC | ZBE102 | NC | |
| ZB4BZ103 | 2 NO | ZBE203 / ZBE204 / ZBE205 | double: 2 NO / 2 NC / NO + NC | |
| ZB4BZ104 | 2 NC | ZBE1016 / ZBE1026 | low-power (electronic inputs) | |
| ZB4BZ105 | 1 NO + 1 NC | ZBE201 / ZBE202 | early-make NO / late-break NC | |
| ZB4BZ141 | 1 NO + 2 NC | ZBE501–ZBE505 | high-power switching |
Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.
Ratings for the whole range (Schneider catalogue, January 2026)
- IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
- −40 to +70 °C; up to 10 million operations for pushbuttons
- 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
- IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)
Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.
Installing
The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.
Useful accessories
- Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
- Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
- Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
- 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)
Metal XB4 or plastic XB5?
They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.
Buying notes
- Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
- IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
- Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
- Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
- Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
- Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
- XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
- FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
- Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
- Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
- Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
- How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026
Specifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Projecting (raised, ~Ø29.5mm cap)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (head-only; add ZB4 contact block)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
ZB4 HEAD only (non-illuminated black projecting, momentary); complete unit = XB4-BP2
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Pn note
|
Corrected: ZB4BP2 = BLACK PROJECTING pushbutton head (se.com datasheet: black projecting Ø22 spring return), not red/guarded. Color 2=black; BP=projecting actuator.
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$54.18 — $73.99
across 2 sellers in US dollars
Quick Specs
- Actuator Function
- Momentary
- Actuator Type
- Projecting (raised, ~Ø29.5mm cap)
- Certifications
- UL, CSA, CE
- Color
- Black
- Contact Configuration
- None integral (head-only; add ZB4 contact block)
What People Are Saying
“Guarded button with a raised ring around the actuator that prevents accidental presses. Used for stop buttons near moving machinery where operators might lean against the panel. The guard forces delib”