XB4BS8445GEX
ActiveSchneider Electric XB4BS8445GEX
Emergency Stop Switches / E-Stop Switches E.stop PB turn ATEX
Specifications
|
Bezel material
|
metal
|
|
Component type
|
complete unit
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Lead time
|
11 Days
|
|
Manufacturer series
|
Harmony XB4
|
|
Mouser part number
|
996-XB4BS8445GEX
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Rohs status
|
|
|
Series description
|
Schneider Harmony XB4 complete 22mm pushbutton with chrome-plated METAL bezel and metal mounting collar (industrial IEC command switch)
|
Installation Quick Reference
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
Dimensions
Troubleshooting
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
Where to Buy
Price range
$205.35 — $205.35
across 1 distributors
Quick Specs
- Bezel material
- metal
- Component type
- complete unit
- Enriched by
- schneider-decoder-2026-08-12
- Lead time
- 11 Days
- Manufacturer series
- Harmony XB4
