3SU1130-0AB40-1BA0
현행 제품SIRIUS ACT Green Flush Push Button (1NO)
Green flush momentary push button, Siemens SIRIUS ACT series. 22mm cutout, IP66/IP67/IP69K, metal housing, with 1NO contact.
일반적인 용도
Siemens SIRIUS ACT push button found on Siemens-controlled manufacturing lines, particularly in automotive plants (BMW, VW, Mercedes production facilities heavily use Siemens automation). The metal front ring provides a premium feel and superior corrosion resistance. The 3SU1 series integrates tightly with Siemens S7 PLC systems — Siemens offers pre-built function blocks for button input handling. Common in Germany, Eastern Europe, and Chinese automotive plants.
주요 사용 설비
사양 목록
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE, ATEX, IECEx
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP66/IP67/IP69K
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
70°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-25°C
|
이 아이콘이 있는 사양은 제조사의 원본 출처 페이지에 연결되어 있습니다
추가로 필요한 부품
이것은 모듈형 부품입니다. 완전한 조립을 위해 다음이 추가로 필요할 수 있습니다:
호환 대체품
이 제품들은 다른 제조사의 기능적으로 동등한 호환품입니다.
IDEC
HW1B-M110G
HW Green Flush Push Button (1NO)
Eaton
M22-DP-G-K10
M22 Green Flush Push Button with 1NO Contact Block
ABB
MP3-10G
Modular Extended Green Push Button (1NO)
Siemens
3SU1100-0AB40-1BA0
SIRIUS ACT Green Flush Push Button Plastic (1NO)
Schneider Electric
ZB4-BA3
Harmony XB4 Green Flush Push Button Head
Eaton
M22-D-G
M22 Green Flush Push Button
ABB
MP1-10G
Modular Green Flush Push Button (1NO)
Omron
A22-FG-10M
A22 Green Flush Push Button (1NO)
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
배선도
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
동영상
Wire Push Buttons to PLCs Like a Pro - Easy Step Guide!
Master PLC Wiring: Safe Single-Button Start/Stop Control
Master PLC Programming: Start/Stop/Jog Circuits Made Simple
Welcome to RSP Supply Education Channel
구매처
가격 범위
$1.82 — $65.59
4개 대리점
주요 사양
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE, ATEX, IECEx
- Color
- Green
- Contact Configuration
- 1NO
사용자 후기
“Our dairy plant does high-pressure hot water washdowns every shift. Regular IP65 buttons lasted maybe 6 months. Switched to Siemens SIRIUS ACT with IP69K and they've survived 18 months of daily abuse so far. Worth every penny of the premium.”
“If you are already in the Siemens ecosystem (S7 PLC, TIA Portal), the SIRIUS ACT buttons integrate nicely. The metal front ring feels premium. Downside is they are pricier than Schneider/Eaton for the same function.”
자세히 보기
데이터 출처
사양 및 제품 데이터는 다음 참고 자료에서 수집되었습니다.
3SU1130-0AB40-1BA0 Siemens Product Page
https://sieportal.siemens.com/en-ww/products-services/detail/3SU1130-0AB40-1BA0
접속일 March 28, 2026